- 11-15-2012, 11:32 AM #76
Is there a way to have voicemail play back over the headset instead of the phone loud speaker? It makes it hard to listen to voicemail in public. Also, I windows RT version of this app would be great for my Surface!
- 11-16-2012, 09:21 AM #77Is there a way to have voicemail play back over the headset instead of the phone loud speaker? It makes it hard to listen to voicemail in public. Also, I windows RT version of this app would be great for my Surface!
Also, I would love to develop for WinRT, but it is very difficult for me to do so right now. If in a couple of months nobody has created a good GV client, then I can give it a go :)
- 11-17-2012, 11:31 AM #78
- 11-17-2012, 04:11 PM #79
On my Lumia 920, when I go to settings and push notifications, select it to 'on' the app crashes to main screen. Then when I come back to it, push notifications are again set to 'off'. Any help regarding this?
What I want to achieve if possible is to get my text messages instantly to the app with a notification. Right now my text message plan does not support a lot of text messages and I have been using email for this purpose, but I hope it can be done with this app?
EDIT: Got everything working! Sweet! Love the app, and looking forward to future updates :)
Last edited by Glavata; 11-18-2012 at 01:12 AM.
- 11-18-2012, 09:51 PM #80
- 11-18-2012, 10:31 PM #81
Loving this app! Just a few things to report that I've found. I am using Windows Phone 8 and the paid version of the app.
Possible bugs (or user error):
1) After entering the "call/text" section of MetroTalk, I chose "pin to start" and "pin to start (auto dialpad)". Each option pinned a separate tile labeled "call/text" to my start screen, but each of them leads straight to the inbox when tapped. I really would LOVE being able to go directly to my contacts rather than the inbox at startup.
2) When choosing the "offline" calling option, the system prompts me to a call with a long string of numbers, but the only number I am connected to is my voicemail. It didn't prompt for my pin so it couldn't have been that. Am I supposed to wait a few seconds for it to send the appropriate numbers or is this not working the way it should?
I would LOVE the option to select a contact from the "call/text" area and have it call them directly, instead of the app auto-populating a text screen and needing an additional press for a call.
Another thing - when I press on a contact it auto-populates their name in the text field, but whether I continue to make a call or not (and don't text), if I go directly to another contact to text them from the contact boxes, both names are then auto-populated in the "To" field. It's a minor inconvenience, I know, because I can just tap to remove, but it'd be nice if that could be reworked somehow.
- 11-20-2012, 11:07 AM #82
- 11-21-2012, 01:22 PM #83
Thanks so much for your commitment to MetroTalk updates and continuing to ensure it works great while still adding more functionality. It's all very appreciated.implementing fast-resume is giving me a bit of a hard time. Reason being that navigation becomes slightly complicated, the more secondary tiles the user can pin on his/her start screen (implementing fast-resume for just the main tile is easy).
12-05-2012, 12:38 AM #84
- 1 Posts
- 0 Post(s)
- 0 Thread(s)
do we have any updates on the updates?
small feature request is when you place a call with metrotalk, can we have the option to NOT prompt if i want to call via google voice? (because at that point im sure i do)
also, is it possible to do a dial-pad/contact list for calling? or have the call/text area list the contacts with the option to call/text?
- 12-05-2012, 12:51 AM #85
- 12-05-2012, 03:01 AM #86
Regarding the auto-dialing, I assume you mean the screen where you select the calling method? If so, if you go to the settings of the app, you can select the preferred calling method. When that is set, then the dialing happens automatically. Like Mystictrust mentioned, prompts that come from the OS itself and not from the app, cannot be skipped.
If you go to Call/Text, you can select a contact from the auto-complete list (or click the + button to go to the contact picker), and then hit the call button. If you have a default calling method selected, then the calling will happen with just that single tap. Did you have something different in mind?
12-05-2012, 05:51 PM #87
- 2 Posts
- 0 Post(s)
- 0 Thread(s)
I'm a new WP8 user with a Lumia 920. I installed the MetroTalk app and setup my google voice account. App looks great - I like the colors and design. And I'm thankful for the google voice functionality on WP8.
I do have a question/problem though. When I get a new text message, I can do the quick reply without a problem. However, if I don't do the quick reply and just open the MetroTalk app to look at my messages, it says "Looking for new messages" at the top for about 2 to 5 minutes, then it finally shows the new text messages that already popped up during the pop-up notification earlier. Question is, why does it take 2 to 5 minutes when I open MetroTalk to check for new messages since it gets messages as push notifications? Shouldn't those messages already be retrieved? I have the Refresh on Start option turned off. I am currently running the MetroTalk Free edition, but of course I'll get the full version once I get this figured out (I didn't realize the two difference until I started reading this thread). Am I missing something here? Doing something wrong?
Also, it looks like I have to open MetroTalk for the first time (after phone turns on) so it will get push notifications. Is that right? Is there a way to make it auto-run when the phone starts? Or is that against WP8 design? Once in the app, if I hit the back button, it stays running in the background and gets new notifications once again. If I go back into the app, I have to refresh and let it search for new messages and wait that 2 to 5 minutes for it to look for new messages.
I appreciate the help, thanks!
- 12-05-2012, 10:15 PM #88
When you actually launch the app, then it needs to do a full folder refresh to show you any new messages. Even if the live tile says there are unread messages, the app can't know that! I know it sounds stupid, and in my opinion, it is! By default, a full folder refresh is triggered automatically if 30 minutes have passed since the last time a refresh happened. If that timer hasn't expired, and if you don't have "refresh on start" enabled, then you need to manually hit refresh. On my phone, on either WiFi or LTE, a full folder refresh takes anywhere from 5 to maybe 15 seconds if I have a bad connection. Your times of 2 to 5 mins definitely doesn't sound normal. Are you sure it wasn't just a super-weak cellular connection that was causing this?
I've been trying to find the best way to address this, and there is no clear best solution. I'll continue looking into it, but unless Microsoft does something in regards to how they handle push notifications, then any solution I pick will have its limitations.Also, it looks like I have to open MetroTalk for the first time (after phone turns on) so it will get push notifications. Is that right? Is there a way to make it auto-run when the phone starts? Or is that against WP8 design? Once in the app, if I hit the back button, it stays running in the background and gets new notifications once again. If I go back into the app, I have to refresh and let it search for new messages and wait that 2 to 5 minutes for it to look for new messages.
I hope this helps. I know my answers are not ideal, but we are doing the best we can with what we have available. MetroTalk will continue getting updates, as more things become possible, either by Microsoft or Google.
12-06-2012, 03:33 AM #89
- 2 Posts
- 0 Post(s)
- 0 Thread(s)
Thanks for the quick reply. Thanks for explaining how WP8 works - I always like to know how the OS operates and behaves behind the scenes. I've been doing these tests on wifi and have a good network speed. I tried uninstalling the MetroTalk free and bought the paid version, hoping that might work better. However, it still takes time to log in - it is a little faster. I timed the login, and it takes right around 55 seconds from when I open MetroTalk to when it says it is done checking for messages. Whether I had a new message or not did not seem to affect that time. I also went into my Google Voice account and removed the second phone number I had on there (to simplify things) and tried to find any settings that might cause this. But nothing changed the login time. I've looked over all the settings in MetroTalk and can't find anything that would cause this I think. Then, as a comparison test, I installed GoVoice (but didn't configure the notifications). When I open GoVoice, it connects to my Google Voice account and checks for messages in less than 5 seconds. Can you think of any other ideas why it is taking longer in MetroTalk to connect to my account? 55 seconds to connect is just too long to wait. Thanks :)
- 12-06-2012, 10:47 AM #90
- 12-06-2012, 11:55 PM #91
First of all I just want to say great job!! I didn't know much about GV until I switched to WP8 and your app helps me a lot. So a big thank you!!
I just have a quick suggestion. Sometimes I would be at somewhere I don't have data connection (still have regular cellular signal, just no data). And as we all know WiFi will not stay on when screen is locked (I have a Lumia 920). So in that case I will not be able to get push notifications for SMS. Do you think you can implement a way that either
a) let me toggle "Receive text messages on this phone", as seen under (GV web app) "Settings" -> "Phone".
b) detect if the push notification actually arrives or not. If, say, the server doesn't get a delivery confirmation after 30 minutes, send out a real text message instead.
Again I have absolutely no idea how hard or easy this is gonna be, but I think it would be awesome to see these features.
Thanks a lot!! :)
- 12-10-2012, 11:20 AM #94
- 12-10-2012, 11:23 AM #95
- 12-10-2012, 11:27 AM #96
2 purchases coming your way when that feature is implemented.
- 12-10-2012, 11:30 AM #97
The live tile, can be updated through 2 ways:
(a) If you are already successfully receiving push notifications, then an unread counter on the live tile should also be updated, whenever a new notifications is received. If you need help enabling this functionality, please let me know. You can find this in settings -> push notifications; this can also be useful: Push Notifications MetroTalk.
(b) Through a background agent, that runs every 30mins, and checks for new messages. This option can be found under settings -> updating -> live tile sync.
- 12-10-2012, 03:42 PM #99
First time poster. Let me just say your app is amazing. It lets me avoid the $20 dollar unlimited text messaging per month fee with AT&T. Brilliant. I purchased the paid version for the Lumia 920. Is there a way to put notifications in the lock screen? I go to the lockscreen settings, and when I choose one of the blank spots, Metrotalk doesn't show up in the application selection.
- 12-10-2012, 04:29 PM #100
- New: Windows Phone 8 support
- New: Fast resume
- New: Multi-size tile support
- New: Lock-screen unread counter
- New: Text-to-speech
- New: Added ability to auto-dial a contact directly from the start screen (a new pin-to-start menu has been introduced in Call/Text)
- New: Additional folder pages can now be downloaded using a scroll-up gesture
- New: Option for enabling private mode, which hides any sender or content info for new notifications
- New: Option to disable vibrating on new messages
- Update: Added new icon for the Call/Text secondary tile
- Update: The account PIN is now hidden in settings
- Bug fix: Secondary tiles are working now on WP8