1314 for Roger Lumia 920 available

[borasar]

I would except I have no connection or E or low 3G, it will take forever and would likely mess up, so don't want to take my chances

Like the 1308, you can download it over Cellular, if you want.
It weights about ~90MB

 

[nMIK-3]

My Internet Sharing is now fixed.

Short history.
-Originally it worked and then a Network+ / Access Point update broke it.
-1308 update fixed the issue
-Nokia released a combo update for Network+ / Access Point and since then it was broken
-1314 now once again fixed my Internet Sharing *

* Probably until Nokia updates Network+ / Access Point and brake it again (?!)

 

[TruPlaya187]

Like the 1308, you can download it over Cellular, if you want.
It weighs about ~90MB



Unfortunately I am using the Rogers Lumia 920 on T-Mobile USA.

so if I'm using a unlock Rogers Lumia on my Bell network, I won't get it yet???

 

[metalchick719]

Oh! Surprise, surprise! I checked for an update this morning, but there was nothing; just checked again and now, it's downloading! Cool, I'm about to get the 1314 firmware on my unlocked Rogers 920 that I'm using on T-Mobile.

 

[borasar]

you probably will since he got it on T-Mobile, I think you misinterpreted his comment. He was just responding to my question about a test on Rogers network specifically

so if I'm using a unlock Rogers Lumia on my Bell network, I won't get it yet???

 

[Simon Tupper]

After the update I ran my first problem with my 920. My main email account won't sync automatically and I can't delete it to reinstall it. Otherwise the phone is awesome.

 

[pankaj981]

My Internet Sharing is now fixed.

Short history.
-Originally it worked and then a Network+ / Access Point update broke it.
-1308 update fixed the issue
-Nokia released a combo update for Network+ / Access Point and since then it was broken
-1314 now once again fixed my Internet Sharing *

* Probably until Nokia updates Network+ / Access Point and brake it again (?!)

So are you currently using access point?

 

[Noob1ee]

After the update I ran my first problem with my 920. My main email account won't sync automatically and I can't delete it to reinstall it. Otherwise the phone is awesome.

Have you tried a soft reset?

 

[nMIK-3]

so if I'm using a unlock Rogers Lumia on my Bell network, I won't get it yet???

You should get the update as well.

So are you currently using access point?

Yeap both Network+ and Access Point

 

[Simon Tupper]

Have you tried a soft reset?

yes it seems like I will have to reset it to factory settings for the first time.

 

[Noob1ee]

yes it seems like I will have to reset it to factory settings for the first time.

No, not a hard reset, a soft reset (hold volume down + power button until phone restarts).

 

[borasar]

hey Noob1ee, a little off topic for this thread, but
http://forums.windowscentral.com/no...-1308-rogers-no-lte-access-point-useless.html

 

[Simon Tupper]

No, not a hard reset, a soft reset (hold volume down + power button until phone restarts).

yeah I tried, but for some reasons it won't work

 

[luv2skipow]

Just forced a check for the update and it is now available OTA!!!!

 

[ttsoldier]

Yup. Seeing it OTA for me as well.

 

[chezm]

confirmed as well here, downloading now. hoping this also corrects my battery issues.

Update: completed successfully, running 1314. Will provide feedback tomorrow.

 

[JohnnyCanuck]

OTA as well ... downloaded, installed without any issues. Seems to be a fairly small download and the install was much quicker than 1308. Have no real feedback at this point, though.

 

[anon(5334066)]

Slight OT, but can anyone with an unlocked 920 on Rogers confirm if Internet Sharing works on other carriers? Thanks in advance.

 

[ttsoldier]

Slight OT, but can anyone with an unlocked 920 on Rogers confirm if Internet Sharing works on other carriers? Thanks in advance.

My internet sharing history is funny.

When i first got my phone, it worked
Then it stopped
Installed access point - Started to work
Updated to 1308 - Stopped working
Got access point update - Started working
Randomly stopped working now.

Now I updated to 1314 and it's still not working. An Access Point update is needed.

 

[albashiq]

please can someone confirm that heating problem in 1308 fixed in this new 1314 firmware

if soo i will update mine if it is available manually cuz heating killing me
phone go hot with the smallest task you do with it this is just crazy before this 1308 i never faced this problem

can someone test it and see if part above main camera get hot or not

thanx

and when this 1314 fw will be released in Middleast anyone has info about it ?