Help My Lumia 520.!!

akosiHUNTER

New member
May 29, 2014
15
0
0
Visit site
Here's My problem..

i accidently dropped it on water then i immediately turned it off then put it on a rice bag..

after 2days i turned it on...

it vibrated but its only a black screen..

i can still hear the screenshot sound when i do the screenshot combo
and still the 3 capacitive buttons is still vibrating....

my Lumia 520 is still recognizable by my computer but no display its only black/blank screen..
tried reprogramming it via NCS but still no display....

what do you think is the problem? Please Help Me....:unhappysweat:
 

BatteryLife

New member
Dec 12, 2013
422
0
0
Visit site
Here's My problem..

i accidently dropped it on water then i immediately turned it off then put it on a rice bag..

after 2days i turned it on...

it vibrated but its only a black screen..

i can still hear the screenshot sound when i do the screenshot combo
and still the 3 capacitive buttons is still vibrating....

my Lumia 520 is still recognizable by my computer but no display its only black/blank screen..
tried reprogramming it via NCS but still no display....

what do you think is the problem? Please Help Me....:unhappysweat:

Maybe its just the screen. Try replacing the screen DIY or maybe bring it to a Nokia service center and let them have a look.

Did you take out the battery after it was dumped into water?
 

Pacus1x

New member
Jun 25, 2013
444
0
0
Visit site
Could be possible that the contact between the LCD and the board is still wet, you can try disassembly your L520 and dry the LCD connector with air, NOT hot air. Maybe clean it gently with alcohol.
 

Pacus1x

New member
Jun 25, 2013
444
0
0
Visit site
Maybe you need to apply some air on the LCD connector that goes to the board.

Check this tutorial.

In the pic number 5, that shows where is located the LCD connector, you need take out gently, and then apply some air into the connector. Then if you want, you can clean that connector with q tips and alcohol.
 

akosiHUNTER

New member
May 29, 2014
15
0
0
Visit site
Maybe you need to apply some air on the LCD connector that goes to the board.

Check this tutorial.

In the pic number 5, that shows where is located the LCD connector, you need take out gently, and then apply some air into the connector. Then if you want, you can clean that connector with q tips and alcohol.

welll i did what you told me and still no success of anything.. any other suggestions? thanks for the help ^_^ i do appreciate it..!
 

Theo_andravida

New member
Jul 22, 2014
47
0
0
Visit site
Here's My problem..

i accidently dropped it on water then i immediately turned it off then put it on a rice bag..

after 2days i turned it on...

it vibrated but its only a black screen..

i can still hear the screenshot sound when i do the screenshot combo
and still the 3 capacitive buttons is still vibrating....

my Lumia 520 is still recognizable by my computer but no display its only black/blank screen..
tried reprogramming it via NCS but still no display....

what do you think is the problem? Please Help Me....:unhappysweat:

Exactly the same happened to my lumia 520 too. Sorry pal, but warranty does not cover qater drop and screen isnt worth changing. Do what i did. Take another lumia 520! Its cheap anyway!
 

Members online

No members online now.

Forum statistics

Threads
322,901
Messages
2,242,866
Members
428,004
Latest member
hetb