[Jeffrey Fox]

So, kind of a dumb Kinect related question on it's functionality. In standby mode when you say "Xbox on" the Xbox will power on, I got that from the advertising. But what about your TV and A/V receiver? Is it possible for the Xbox One to turn them on as well or will I still be reaching for my remotes when I enter the room?

I plan to trade in my Xbox 360 for the Xbox One this season take advantage of the specials Microsoft is pushing out and I wanted to finish up my research and prepare my living room for the transition.

[Zulfigar]

It turns them on as well, both TV and receiver if you have it set up.

[Rhody#WP]

The Kinect has an IR blaster that sends the appropriate commands to an AV receiver, TV, cable box, etc. after you set them up. The IR blaster is quite powerful and bounces off things in the room. I have my components inside a TV cabinet and the voice commands work very well.

[TheJoester09]

Once you have everything hooked up and turned on, you can go into the settings and set it up so that the Kinect memorizes the remote codes for your devices. It's just like setting up a regular remote, only easier because the Xbox does most of the work for you.

[ncxcstud]

Under the settings menu (either go to My Games and Apps and toggle down to "Settings" or hit the 'menu/hamburger' button and select settings. Go to TV (or a similar heading under the settings menu) - and go through the steps to add your devices.

My Kinect turns on my TV, DirecTV receiver, and my audio bar all on and off when I say XBOX On, or XBOX turn off... ;) It's a pretty cool feature.

[DavidinCT]

It turns them on as well, both TV and receiver if you have it set up.

This feature is called HDMI-CEC, all your devices need to support it to enable this feature. If it is not working, bring up your manual for your TV or receiver, find the area of HDMI control/HDMI-CEC (see the above link some companies call it something different), and find out how to enable it. A lot of devices have it disabled by default.

If you are using a older TV or audio setup without HDMI or this feature, you can not take advantage of it (for at least the one device)

If all your devices support it, in a perfect world, it should be a pretty awesome feature, Turn on your Xbox one, TV goes on, changes to the right HDMI port, then audio receiver turns on and goes to the correct input, change to another device, the same things happen...

Of course that is in a perfect world...and we know this is NOT a perfect world.

[ncxcstud]

Or - with the Kinect you don't need HDMI-CEC at all as the Kinect is an IR-Blaster and does it all on its own ;). As long as a device has IR capabilities (which I believe is still - every device known to man) and the XBOX One has the appropriate codes for it. It'll work.

This feature is called HDMI-CEC, all your devices need to support it to enable this feature. If it is not working, bring up your manual for your TV or receiver, find the area of HDMI control/HDMI-CEC (see the above link some companies call it something different), and find out how to enable it. A lot of devices have it disabled by default.

If you are using a older TV or audio setup without HDMI or this feature, you can not take advantage of it (for at least the one device)

If all your devices support it, in a perfect world, it should be a pretty awesome feature, Turn on your Xbox one, TV goes on, changes to the right HDMI port, then audio receiver turns on and goes to the correct input, change to another device, the same things happen...

Of course that is in a perfect world...and we know this is NOT a perfect world.

[Jeffrey Fox]

Thanks guys, that makes me excited to know this should be a pretty easy set up. I'll need to check my tv (TCL brand) but pretty sure my Onkyo receiver is good to go.

[ncxcstud]

Post what model TV you have and I (or someone else) could check to see if it has the remote codes to it. I'm at work now, but I can check quickly when I go home in a few hours...

[Rhody#WP]

This feature is called HDMI-CEC, all your devices need to support it to enable this feature. If it is not working, bring up your manual for your TV or receiver, find the area of HDMI control/HDMI-CEC (see the above link some companies call it something different), and find out how to enable it. A lot of devices have it disabled by default.

Everything I've read says the Xbox One does not support HMI-CEC.

[jeffchapik]

By default, the Xbox will only power on/off your TV, even after you've entered the codes for your other devices. You have to go into the settings and tell it you want to power on the receiver and Sat/cable boxes as well.