[r3b3lw0lf]

This is my info from speccy

Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i5 4460 @ 3.20GHz 32 °C
Haswell 22nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 799MHz (8-8-8-24)
Motherboard
ASRock H87 Performance (CPUSocket) 33 °C
Graphics
BenQ GL2460 (1920x1080@60Hz)
1024MB ATI AMD Radeon R7 200 Series (Gigabyte) 27 °C
Storage
465GB Samsung SSD 850 EVO 500GB (SSD) 30 °C
931GB Seagate ST1000DM003-9YN162 (SATA) 30 °C
1863GB Seagate Expansion Desk SCSI Disk Device (USB (SATA)) 43 °C
1863GB Western Digital WD Ext HDD 1021 USB Device (USB (SATA)) 29 °C
THE DRIVE BELOW
1397GB Seagate GoFlex Desk USB Device (USB (SATA)) 36 °C
THE DRIVE ABOVE
Optical Drives
PIONEER DVD-RW DVR-217
Audio
Realtek High Definition Audio

=========================================================
Not show how the above will show... hope its need. straight copy and paste LOL

1397GB Seagate GoFlex Desk USB Device (USB (SATA)) 36 °C
This drive here... is the drive that never shows when I reboot or turn on pc.
If I unplug and plug back in after pc is on... its good to go...

Any ideas?
I had it on a usb3 usb card (where the other 2 drives are), and then swapped it, to the mobo usb3 port. But again, no difference.
I am at a loss, any help would be excellent, cheers.

[r3b3lw0lf]

Just a cheeky aside. 45 views... and not one bit of help? *cheeky grin*
Any ideas or thoughts, I will try :P

[Chintan Gohel]

Just a cheeky aside. 45 views... and not one bit of help? *cheeky grin*
Any ideas or thoughts, I will try :P

do external hard drives have drivers in device manager? Maybe they can be reinstalled?
And what happens if you remove one of the other drives and then insert the 1397 one?

[r3b3lw0lf]

hmmm I posted before I rebooted LOL

Thats the image I posted BEFORE the reboot
Now after reboot, this is interesting...



I have a exclamation mark next to one.
I did do a "update driver"... but got told im using the latest one LOL

[r3b3lw0lf]

This device cannot start. (Code 10)

{Operation Failed}
The requested operation was unsuccessful.

In properties of the drive.

I unplug it, and plug back in, and it shows all fine

[Chintan Gohel]

This device cannot start. (Code 10)

{Operation Failed}
The requested operation was unsuccessful.

In properties of the drive.

I unplug it, and plug back in, and it shows all fine

what about removing that driver and letting it install itself?