08-26-2016 05:54 AM
323 ... 23456 ...
tools
  1. Soundtweaker's Avatar
    Not seeing it in Norcal yet even reinstalled WDRT.
    07-01-2016 06:00 PM
  2. Y C Neo's Avatar
    After update to Redstone 14379, the double tap to wake appear under the "lock screen" option also.
    07-01-2016 06:04 PM
  3. pankaj981's Avatar
    Weird, WDRT thinks my phone 950XL, dual-SIM, is up-to-date on 16082.

    I'm with some of the others now, having had to spend a LOT of time patching up my botched Restore, I'm thinking I'll try to hold out for 9/2, and hope they roll this in, which seems pretty likely...
    Yep, no firmware for the US XL DS version
    07-01-2016 06:33 PM
  4. PGrey's Avatar
    Yep, no firmware for the US XL DS version
    Ugh, bummer, hopefully it'll get fixed for 9/2. I yearn for DTTW, from my previous phone.

    I wish I could've gotten an unbranded 950XL single-SIM, but it wasn't readily available in the US, for some reason...
    07-01-2016 06:43 PM
  5. telomoyo's Avatar
    After update to Redstone 14379, the double tap to wake appear under the "lock screen" option also.
    I don't see it.
    07-01-2016 07:16 PM
  6. YC Neo1's Avatar
    I don't see it.
    dttw.jpg
    pankaj981, IJPI and TechFreak1 like this.
    07-01-2016 07:26 PM
  7. telomoyo's Avatar
    Thanks for the reply. I have 14379, and I don't have that option on mine.
    07-01-2016 07:35 PM
  8. pankaj981's Avatar
    Thanks for the reply. I have 14379, and I don't have that option on mine.
    Did you update to RS after receiving the new firmware?
    telomoyo likes this.
    07-01-2016 08:03 PM
  9. hyperexpert's Avatar
    Release for the dual sim US already!
    07-01-2016 08:27 PM
  10. Y C Neo's Avatar
    Originally posted by telomoyo
    Thanks for the reply. I have 14379, and I don't have that option on mine.
    You need to flash the new firmware first.
    telomoyo likes this.
    07-01-2016 08:31 PM
  11. mikepalma's Avatar
    After flashing the new firmware, do I hard reset and then update to Redstone?
    07-01-2016 08:38 PM
  12. Y C Neo's Avatar
    After flashing the new firmware, do I hard reset and then update to Redstone?
    It is not necessary. After flashing the firmware, your phone is back at a factory state already.
    Just note that if you plan to upgrade to Redstone after the flashing, don't restore your backup (especially the backup was done on a Redstone build), don't install (just updates existing apps) any apps from Store except the Windows Insider.
    After upgraded to Redstone, it is up to you if you want a factory reset, I find it not necessary though.

    Posted via the Windows Central App for Android
    07-01-2016 09:51 PM
  13. Cheeky_47's Avatar
    For those who are brave...or stupid, depending on how you look at it, (I'm a combination of stupid and impatient...and daring!)
    If you don't mind living on the edge, praying (if that's your thing) and not bothered about having shakey knees and butterflies, you can down load the firmware here, http://www.lumiafirmware.com/ser/RM-1085/guid/059X747 and use the instructions here, http://www.lumiafirmware.com/info and flash your device.
    I have a 950XL from HN and it works beautifully. (Australia)
    Beware that this resets your phone to OOTB but with the latest firmware. DO NOT do a restore if the most recent back up you did is with RS1.
    Let the phone finish resetting, then download Windows Insider, update to RS1 and THEN restore.
    It works absolutely fine, obviously you can wait until the firmware is widely available...but where's the fun in that??? :)
    07-01-2016 10:03 PM
  14. Zulfigar's Avatar
    For those who are brave...or stupid, depending on how you look at it, (I'm a combination of stupid and impatient...and daring!)
    If you don't mind living on the edge, praying (if that's your thing) and not bothered about having shakey knees and butterflies, you can down load the firmware here, http://www.lumiafirmware.com/ser/RM-1085/guid/059X747 and use the instructions here, http://www.lumiafirmware.com/info and flash your device.
    I have a 950XL from HN and it works beautifully. (Australia)
    Beware that this resets your phone to OOTB but with the latest firmware. DO NOT do a restore if the most recent back up you did is with RS1.
    Let the phone finish resetting, then download Windows Insider, update to RS1 and THEN restore.
    It works absolutely fine, obviously you can wait until the firmware is widely available...but where's the fun in that??? :)
    Before I plunge into this, does this work on both Single Sim and Dual Sim?
    07-01-2016 10:52 PM
  15. Cheeky_47's Avatar
    I'm sorry I have no idea... Mine is single sim.
    07-01-2016 11:12 PM
  16. YC Neo1's Avatar
    I'm sorry I have no idea... Mine is single sim.
    WDRT will detect your device and download/install the correct firmware for you, not to worry. Just be sure it is showing software on server "01078.00053.16236.350XX" before you proceed.
    07-01-2016 11:42 PM
  17. Humhead's Avatar
    So you are saying everyone should do this and there is no chance of anything going wrong? Got it. ;)
    07-02-2016 12:31 AM
  18. Cheeky_47's Avatar
    The method I posted is ONLY if the FW isn't showing up in WDRT, which for me, in Australia, it isn't. And since I want the update now I chose to do it this way.

    If you're not comfortable flashing your phone I would wait until it is available from the server.
    07-02-2016 01:27 AM
  19. Narathan's Avatar
    Hey guys/galls, I must say the DTTW works amazingly, but now I don't see the "double tap to turn the screen off". It used to be located at the lock screen where it now says "double-tap to wake".

    So I've mixed feeling about this update to be honest. I love that I can tap to wake but I dislike the fact that I can't tap to sleep. Kind of defeats the point of tap to wake if I still have to use the power button to turn it into standby. This is after I received an update for "gestures & touch" so its probably fixed with another update. fingers crossed.

    Update: sometimes DTTW doesn't work. If I tap several times, I'm greeted with the "pull down to shutdown" screen.
    Pretty wonky thus far...
    Last edited by Narathan; 07-02-2016 at 06:24 AM.
    07-02-2016 05:56 AM
  20. YC Neo1's Avatar
    Hey guys/galls, I must say the DTTW works amazingly, but now I don't see the "double tap to turn the screen off". It used to be located at the lock screen where it now says "double-tap to wake".

    So I've mixed feeling about this update to be honest. I love that I can tap to wake but I dislike the fact that I can't tap to sleep. Kind of defeats the point of tap to wake if I still have to use the power button to turn it into standby. This is after I received an update for "gestures & touch" so its probably fixed with another update. fingers crossed.

    Update: sometimes DTTW doesn't work. If I tap several times, I'm greeted with the "pull down to shutdown" screen.
    Pretty wonky thus far...
    Double tap to off is under the Settings > Personalisation > Navigation Bar.

    Regarding the double tap shows "pull down to shutdown" instead of waking up the device, I saw the same complaints in other forum also, but myself is not able to replicate the behaviour.
    TechFreak1 and Narathan like this.
    07-02-2016 06:28 AM
  21. Narathan's Avatar
    thanks for the reply! Found it. But yeah, "the pull to shutdown" is a bit of a bummer. I'll keep my eye on this. Whats your device? I'm running the single sim.
    07-02-2016 07:22 AM
  22. WuzzoUK's Avatar
    Thanks Cheeky_47. Nothing in WDRT in UK, couldn't wait, so followed your instructions and couldn't be simpler. DTTW now there on my 950XL, downloaded Insider and got back to build 14379 and restored from backup.
    Cheeky_47 likes this.
    07-02-2016 07:49 AM
  23. Lumious's Avatar
    I'm going to keep checking but at the moment nothing new for firmware on the 950 XL, USA in the Northeast (CT). Just a slightly newer firmware update.
    07-02-2016 09:14 AM
  24. Ong Teng Wai's Avatar
    Friend, mind to share your path to of your updates? after WDRT my L950 flashed to 10586.420 then I signed up insider program again to released preview updated it to 10586.456. Is it possible to go directly to FAST RING and get 14379 now? all these just to avoid my DTTW feature get lost. pls advice. thanks!
    07-02-2016 09:48 AM
  25. Humhead's Avatar
    I want to try Cheeky_47 way, but for RM-1116 VAR NAM 4R CV BLACK (x2 sim unlocked north America), there is no new firmware on the site yet. Argh! Wouldn't want to risk putting another regions firmware on it.
    07-02-2016 10:07 AM
323 ... 23456 ...

Similar Threads

  1. Windows 10 on Android phone
    By Palm_forlackofchoice in forum Phone Wars
    Replies: 7
    Last Post: 07-28-2016, 11:46 AM
  2. Replies: 2
    Last Post: 07-28-2016, 03:13 AM
  3. cant get back to build 14393.5
    By Jon Barros in forum Windows 10 Insider Preview
    Replies: 1
    Last Post: 07-28-2016, 12:51 AM
  4. Original Burnout team confirms it is working on new driving game
    By WindowsCentral.com in forum Windows Central News Discussion
    Replies: 0
    Last Post: 07-27-2016, 03:00 PM
LINK TO POST COPIED TO CLIPBOARD