1. TK2011's Avatar
    I am trying out the Continuum dock with a 1080p Panasonic TV and it works well except contents on screen is stretched out a bit such that I can't see the bottom taskbar (similarly for three other sides). Mouse pointer still moves beyond the screen boundary so I can still blindly click on the start button and such but it's just not a good experience. My TV like most others has a stretch mode control (e.g. 4:3 vs 16:9, overscan vs no overscan etc) but it doesn't help in this case. Which is to say source of this issue seems to be on phone (or dock) side rather than TV.

    When I first set it up, there was a setup screen with four arrows at corners (but the tips of arrows were beyond the screen). Is there where I am supposed to fix this thing? If so, how do I get that setup screen again?

    Thank you for any suggestion!
    07-19-2016 11:20 PM
  2. monedetoune's Avatar
    open the TV picture setting, set to scan only instead of 16:9 on the aspect ratio. should fix the issue.
    Chintan Gohel likes this.
    07-20-2016 09:57 AM
  3. TK2011's Avatar
    open the TV picture setting, set to scan only instead of 16:9 on the aspect ratio. should fix the issue.
    There's no such setting on my TV. As I said, I've tried all different settings similar to that to no avail.
    07-20-2016 06:14 PM
  4. Alexander Long's Avatar
    That is called overscan. Some older tv models have that. Depends on you TV, you might find to disable overscan on the setting.
    And try connect your laptop or computer to your TV, see if your TV is a native 1080p display. And try to get your TV setting right from there., and then reconnect TV to phone contnuum.
    Chintan Gohel likes this.
    07-21-2016 12:54 AM
  5. TK2011's Avatar
    That was my initial thought too but it seems to be coming out of the dock already overscanned. I have cycled through all pixel mapping modes available on TV but it doesn't help. "Full" mode setting is the one that's supposed to disable any overscan and give 1:1 pixel mapping but it didn't work either.

    Today I tried it on a Dell computer monitor (1920x1200) and it worked with no problem. But with the Dell, somehow I didn't get the setup screen with four arrows I was getting with my TV. I wonder if there was an adjustment to be done on that setup stage that evaded my attention. If I could just get that setup screen again I would take a closer look but I don't get that screen anymore on my TV.
    07-21-2016 01:49 AM
  6. TK2011's Avatar
    Just for grins I tried another HDMI port on TV and the issue is gone!
    It looks like my TV (Panny 65" Plasma) has different processing for its two HDMI inputs. HDMI2 input I was using earlier seems to have some residual overscan processing you can't bypass completely. I never knew because I never used that port until now lol.
    EDIT: Looking at the manual, there may be another setting or two buried deep in the TV menu that I think could have fixed it for HDMI2. Just FYI for anyone with a Panny TV.
    Last edited by TK2011; 07-21-2016 at 02:42 AM.
    Chintan Gohel likes this.
    07-21-2016 02:14 AM
  7. anthonyng's Avatar
    darn those sneaky manuals! Everything should be plug and play! :D
    07-27-2016 01:27 AM

Similar Threads

  1. If I was to buy the Lumia 930 in 2016, what is the warranty?
    By Windows Central Question in forum Nokia Lumia 930
    Replies: 6
    Last Post: 08-04-2016, 03:26 AM
  2. Battery plugged in, not charging. What do I do?
    By kuropatwa in forum Microsoft Lumia 640 XL
    Replies: 1
    Last Post: 07-19-2016, 09:31 PM
  3. Replies: 1
    Last Post: 07-19-2016, 09:17 PM