1. grezmel's Avatar
    For some reason my camera grip wont charge - i plug the usb into the grip and the light comes on but turns off after a few seconds and doesnt flash to show that its in charging mode.

    Ive tried different charging leads etc

    any ideas ?

    Cheers Graham
    09-10-2014 06:08 AM
  2. raggedy b's Avatar
    Mines the same,found the usb socket is faulty,I have to have the lead at a slight angle to get it to charge,wondering whether I can get it fixed under warranty,probably not
    09-10-2014 08:36 AM
  3. RTGent's Avatar
    Welcome to the board, Graham. Is the grip new? Have you been using it? Are you sure it's not fully charged? I haven't experienced this otherwise.
    09-10-2014 09:35 AM
  4. Jonnny4's Avatar
    I had this issue when the charging course wasn't powerful enough.
    09-11-2014 12:32 AM
  5. grezmel's Avatar
    Thanks for the replies - I'm trying to charge at just above 1A, is this not enough ?
    09-13-2014 07:03 PM
  6. anon(8555314)'s Avatar
    My first one also stopped taking a charge after 3 months. My ATT store replaced it under warranty.

    Here's my theory: In general, any plug such as a usb dongle, micro-USB or earphone jack if wiggled a lot while plugged in can become defective. A male plug that is on a short swivel is a design that should minimize that. I don't think anyone is going to put much effort into fixing the problem because in a few years just about everything will be wireless. I think the Camera Grip is particularly susceptible to this problem.

    The key is to be very careful while engaged to not apply pressure and turn the engaged male device into a lever of sorts.
    Cache likes this.
    09-13-2014 08:01 PM
  7. Cache's Avatar
    I've had to swap four or five for the same issue! Microsoft store has been super helpful each time. Fwiw, only ever used the oem phone charger and cable, gently.
    Ava Musnicki likes this.
    09-15-2014 11:06 AM
  8. grezmel's Avatar
    Just a quick update, the camera grips appear to fail as the charging port rear connectors misalign with the connectors on the internal board.

    I managed to open the camera grip and realign the port and added a bit of hot melt glue to reduce movement. After making sure that all of the screws were tight I reassembled and clipped the case back together.
    It now charges a treat.....

    A bit fiddly, but saved a few quid :)
    Ava Musnicki likes this.
    09-22-2014 03:07 PM

Similar Threads

  1. Lumia 930 search not working
    By WPCentral Question in forum Ask a Question
    Replies: 3
    Last Post: 09-14-2014, 07:47 AM
  2. Nokia camera or nokia camera beta?
    By marinang in forum Nokia Lumia 920
    Replies: 3
    Last Post: 09-10-2014, 08:16 AM
  3. Lumia 730, expected price and Launch date in india...?
    By WPCentral Question in forum Ask a Question
    Replies: 1
    Last Post: 09-10-2014, 05:13 AM
  4. Nokia 525 Cyan Update issues
    By WPCentral Question in forum Ask a Question
    Replies: 1
    Last Post: 09-10-2014, 04:31 AM
  5. OS Experience,camera etc.
    By fearful_claw02 in forum Ask a Question
    Replies: 1
    Last Post: 09-10-2014, 04:10 AM
LINK TO POST COPIED TO CLIPBOARD