1. 5150 Joker's Avatar
    For those of you that have the RM-937, which charging plate are you using? The DT-900 is too small and the DC 50 isn't available yet in the US. Even a non-Nokia yellow pad would be nice.
    12-07-2013 05:19 AM
  2. Pontifex's Avatar
    Doesn't the DT-900 work with the 1520?? :(
    12-07-2013 05:34 AM
  3. 5150 Joker's Avatar
    It might but it's a bit too small

    Sent from my GT-I9100
    12-07-2013 06:21 AM
  4. ezeuzo1's Avatar
    I use the Ravpower wireless charging plate
    12-16-2013 04:01 PM
  5. Lundon44's Avatar
    I still have my Nokia charging stand from my 920 and it works and the 1520 still stand up on it no problem. The stand ends around 2/3 of the way up the 1520.
    12-16-2013 04:28 PM
  6. 5150 Joker's Avatar
    Yeah so I ended up buying the Nokia stand in black. So far it works great! Thanks for the suggestions.
    Lundon44 likes this.
    12-16-2013 05:44 PM
  7. Lundon44's Avatar
    Yeah so I ended up buying the Nokia stand in black. So far it works great! Thanks for the suggestions.
    No problem! Enjoy!
    12-16-2013 05:54 PM
  8. disqusword9press's Avatar
    It is my understanding that Lumia 1520 (AT&T-US version) will not work with Qi-wireless standard devices at all. AT&T’s Lumia 1520 will only work with devices that are PMA wireless standard and you basically have to get it from US side because AT&T’s Lumia 1520 is a special made phone for US consumers. So, make sure you read the carefully the specs of the wireless-charging device you want to buy for your Lumia 1520 and it must say: ‘PMA standard’

    If you are brave enough you should be able to modify your Lumia 1520 to make it compatible with Qi-wireless charging devices. Here is the article, check it out:

    [- DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells -]
    DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells | Windows Phone Central
    12-17-2013 09:38 PM
  9. 5150 Joker's Avatar
    It is my understanding that Lumia 1520 (AT&T-US version) will not work with Qi-wireless standard devices at all. AT&T’s Lumia 1520 will only work with devices that are PMA wireless standard and you basically have to get it from US side because AT&T’s Lumia 1520 is a special made phone for US consumers. So, make sure you read the carefully the specs of the wireless-charging device you want to buy for your Lumia 1520 and it must say: ‘PMA standard’

    If you are brave enough you should be able to modify your Lumia 1520 to make it compatible with Qi-wireless charging devices. Here is the article, check it out:

    [- DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells -]
    DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells | Windows Phone Central

    Did you not read the title of this thread or the subsequent discussions?
    12-17-2013 11:22 PM
  10. Toink's Avatar
    I still have my Nokia charging stand from my 920 and it works and the 1520 still stand up on it no problem. The stand ends around 2/3 of the way up the 1520.
    Hi! Do you mean the Nokia DT-910 wireless charging stand?

    Nokia Wireless Charging Stand Overview - Nokia

    Because I have a couple and I'm getting the 1520 next week. I don't want to buy another wireless charger for the 1520. Thanks!
    12-31-2013 07:12 PM
  11. manicottiK's Avatar
    Hi! Do you mean the Nokia DT-910 wireless charging stand?
    Yes, the DT-910 charging stand works as does the plate. My RM-937 is charging on the stand now; when I go up to bed, it'll finish charging on a plate.
    12-31-2013 07:50 PM
  12. iliramove's Avatar
    The DT-910 works fine with Lumia 1520, NFC included. "Fatboy" is working fine as well just in case anyone is wondering.

    Sent from my RM-937_apac_sea_206 using Tapatalk
    01-01-2014 01:11 AM
  13. jbowyer1's Avatar
    For those of you that have the RM-937, which charging plate are you using? The DT-900 is too small
    Do you just mean in terms of appearance? I charge mine on my DT-900 nightly without any problems, lining up the bottom of the phone with the bottom of the plate, where the LED is, just like I did with my 920.
    01-01-2014 11:00 PM
  14. Benny Vallejo's Avatar
    You are aware that the Nokia Dc-50 IS CURRENTLY OUT RIGHT NOW? Just do a search on eBay and amazon. about $100 with free shipping. Only the WHITE and CYAN are available at the moment.
    01-05-2014 02:23 AM
  15. musicmadmac's Avatar
    I have the DC-50 in White, it's a great. I did buy the White DT-910 which was fantastic but couldn't justify having both so I kept the DC-50 due to being portable.
    01-05-2014 12:21 PM

Similar Threads

  1. Second Nokia Charger??
    By wiederman in forum Nokia Lumia 2520
    Replies: 40
    Last Post: 07-13-2015, 08:01 AM
  2. WTS: Nokia Lumia 822 Verizon
    By thatotherdude24 in forum Marketplace Archive
    Replies: 3
    Last Post: 12-20-2013, 07:00 PM
  3. Nokia Lumia 929 official specs
    By tcman88 in forum Nokia Lumia Icon
    Replies: 26
    Last Post: 12-10-2013, 11:57 AM
  4. Considering the Nokia Lumia 1520
    By nCogNeato in forum Nokia Lumia 1520
    Replies: 10
    Last Post: 12-09-2013, 09:05 AM
  5. Nokia Lumia 1020 Black firmware update?
    By reconrevelations in forum Nokia Lumia 1020
    Replies: 3
    Last Post: 12-07-2013, 09:10 AM
LINK TO POST COPIED TO CLIPBOARD