08-12-2015 12:28 AM
182 ... 34567 ...
tools
  1. multo's Avatar
    Thanks man. I'm planning not to use a case soon. How was photo quality with the lens protector installed?

    I'd say the same. Although you have to make sure there aren't any dust when you install it
    06-04-2014 09:15 PM
  2. myoujin's Avatar
    img_20140605_231442.jpg
    I think camera screen protector very bad. It is finger print magnet. Very hard to clean compare to screen.

    img_20140605_231527.jpg
    Slightly lifted near front camera :(

    And I hate cutting shape at bottom side.
    06-05-2014 11:28 AM
  3. multo's Avatar
    I think camera screen protector very bad. It is finger print magnet. Very hard to clean compare to screen
    Have you tried turning the film over? I found it weird when I first placed mine. I wiped it and it was sticky. Then I took it off and turned it over and found out I placed it with the adhesive side up. I used some tape to take out the lint then placed it back correctly then now the outside is smooth and easy to clean.
    06-05-2014 01:35 PM
  4. myoujin's Avatar
    That not adhesive side. My picture show finger print and need micro cloth to clean properly. If use finger or normal cloth, become oily.
    Before use this protector, I can just wipe using my finger or my shirt before take picture.
    06-05-2014 01:53 PM
  5. multo's Avatar
    That not adhesive side. My picture show finger print and need micro cloth to clean properly. If use finger or normal cloth, become oily.
    Before use this protector, I can just wipe using my finger or my shirt before take picture.

    Is it smooth when you glide your finger over it? Because mine's smooth and if I accidentally touch the lens I can easily use my shirt to wipe out of needed. It doesn't catch fingerprints easily
    06-05-2014 10:27 PM
  6. myoujin's Avatar
    Yes it smooth. Actually I also apply 1st pcs reverse which is sticky. This is second one. 1st already remove. I mean can clean finger print using shirt but not very clean. If you check certain angle, can see the oily stain remain. Can remove using proper cloth.
    06-05-2014 11:05 PM
  7. multo's Avatar
    That's weird. We have the brand and all but mine is easily cleaned
    06-06-2014 02:12 AM
  8. Trench Mouth's Avatar
    I ordered one from Nilkin. it is cut and tapered at the bottom because of the curvature of the screen. otherwise you are left with an overhang. I use a case so that should cover some of the original screen not covered due to the Nilkin taper. We'll see, will update.

    Posted via Ballsak Impression
    06-06-2014 08:46 AM
  9. Booston's Avatar
    06-09-2014 10:04 AM
  10. Qtweeder's Avatar
    ordered the dayjoy one for my 1520, only one i could see which wasnt bizarre shape and is also tempered, time will tell when it arrives, i would like the camera protector bit, so may order the nilkin just for that ;)
    06-09-2014 12:38 PM
  11. irvin792's Avatar
    I ordered the nillkin so when I get it I will post my review. I just like that it comes with camera lens protection (even though I have a pretty bad scratch already, luckily its only in the black area around the lens)
    06-09-2014 12:52 PM
  12. mrZoSo's Avatar
    ordered the dayjoy one for my 1520, only one i could see which wasnt bizarre shape and is also tempered, time will tell when it arrives, i would like the camera protector bit, so may order the nilkin just for that ;)
    I just ordered it also. Just ordered a 1520.3 too,,,lol
    06-09-2014 03:23 PM
  13. mrZoSo's Avatar
    Got my DAYJOY protector and slapped it on. This thing is slick! It has not hampered the touch response or visibility at all!
    Being I bought the phone out of contract, I feel much better about having this glass protect the screen than any other plastic/urethane PET/AR protector.
    At least this one will absorb an impact much better than a plastic one.
    For the protection and the peace of mind it offers, I can definitely live with the edges not making 100% contact.
    06-23-2014 07:06 PM
  14. irvin792's Avatar
    Got my DAYJOY protector and slapped it on. This thing is slick! It has not hampered the touch response or visibility at all!
    Being I bought the phone out of contract, I feel much better about having this glass protect the screen than any other plastic/urethane PET/AR protector.
    At least this one will absorb an impact much better than a plastic one.
    For the protection and the peace of mind it offers, I can definitely live with the edges not making 100% contact.
    Pics! Please
    06-23-2014 09:38 PM
  15. mrZoSo's Avatar
    Here you go.

    wp_20140623_006.jpg . wp_20140623_007.jpg
    06-23-2014 10:20 PM
  16. myoujin's Avatar
    Is that little lifted at screen edge around the screen?

    I'm using Nilkin but the bottom shape haunting me to peel it off. That shape cut too much I think. I can see my screen not covered properly (not black area).
    Sent from my RM-937_apac_malaysia_941 using Tapatalk
    06-23-2014 11:00 PM
  17. mrZoSo's Avatar
    It's not lifted, the tempered glass is perfectly flat. It's just not making contact on the edge due to the curved glass on the phone. My case has a little lip on the screen side, so I don't even feel it.
    06-23-2014 11:07 PM
  18. alllies's Avatar
    Here you go.

    Click image for larger version. 

Name:	WP_20140623_006.jpg 
Views:	79 
Size:	328.1 KB 
ID:	70049 . Click image for larger version. 

Name:	WP_20140623_007.jpg 
Views:	61 
Size:	361.1 KB 
ID:	70050
    Brilliant! Which brand is this?

    Could you also post close up of top and bottom edge?
    06-24-2014 12:40 AM
  19. irvin792's Avatar
    Just installed the nilkin, gotta say the tapered bottom does not bother me as much as I anticipated
    06-24-2014 02:08 AM
  20. multo's Avatar
    It just needs getting used to. When you first install it or even see it the bottom looks funny. After some time it doesn't become annoying anymore
    Sent from my Lumia 1520 using Tapatalk
    irvin792 likes this.
    06-24-2014 09:28 AM
  21. myoujin's Avatar
    2014-06-24-094.jpg

    Here can see weird shape not cover my screen. Although alignment slightly off, both left and right have this.
    If this shape slightly smaller good enough.
    06-24-2014 11:46 AM
  22. irvin792's Avatar
    Click image for larger version. 

Name:	2014-06-24-094.jpg 
Views:	97 
Size:	1.25 MB 
ID:	70106

    Here can see weird shape not cover my screen. Although alignment slightly off, both left and right have this.
    If this shape slightly smaller good enough.

    Are the sides of your stuck down ? Mine has the "grey" non stuck ring around it like the dayjoy one :(

    I'm curious if its because I had issues lining it up initially. Its dead center now.
    06-24-2014 03:25 PM
  23. irvin792's Avatar
    Are the sides of your stuck down ? Mine has the "grey" non stuck ring around it like the dayjoy one :(

    I'm curious if its because I had issues lining it up initially. Its dead center now.
    ?
    06-29-2014 01:59 AM
  24. jojoe42's Avatar
    To the OP who ordered the DAYJOY screen protector for the 1020, did that screen protector arrive alright/cut to the right size? The reviews for it on Amazon say that it's cut to the wrong size, and even in the pictures it looks a little smaller than it should be. I'm looking at ordering one of these because I ripped off the integrated screen protector on my Otterbox Defender (dust was getting under it)
    07-28-2014 08:22 PM
  25. Charles-09's Avatar
    I don't like screen protectors , but it all depends. I don't keep my phone in pocket with keys
    =sir is it ok if theres no screen protector just don't put the phone in your pocket with keys or something I have lumia 1520...
    08-01-2014 12:27 AM
182 ... 34567 ...

Similar Threads

  1. How to Disable screen wake up for notification?
    By cuek80 in forum Windows Phone 8
    Replies: 12
    Last Post: 05-11-2014, 05:39 AM
  2. The NEW Lock Screen in WP8.1
    By Ankmeyester in forum Windows Phone 8.1 Preview for Developers
    Replies: 41
    Last Post: 04-16-2014, 09:39 PM
  3. Installing apps and screen resolution, does it matter ?
    By lamplghter13 in forum Windows Phone 8
    Replies: 2
    Last Post: 04-03-2014, 01:22 AM
  4. I would prefer W8.1-like start screen for WP8.1's start screen
    By danielnight in forum Windows Phone 8.1
    Replies: 1
    Last Post: 04-02-2014, 11:44 PM
  5. [WP 8.1] 3rd medium tiles to all screen sizes confirmed in twitter.
    By Eduardo Wandscheer in forum Windows Phone 8.1
    Replies: 5
    Last Post: 04-02-2014, 10:47 PM
LINK TO POST COPIED TO CLIPBOARD