WC 1M Post Challenge - You Ready?!

[SlingLaker9811]

I think you should enter biotech! You can do biotech after mbbs too but you'll have no hair left on your head till you complete all that and you'll become the forever alone guy so I won't recommend it. I did 2 years of computer science engineering before pursuing mbbs though and then I came back to Arab and there's no engineering for girls here and since i took pcmb with computers and arts in my high school I thought I should become a doctor so far I'll say my mind is not in it's right place all i can remember is human anatomy! This bone that bone this vein that vein blah blah blah

Thank you for the reply! Hmmm.... Now I've become more confused... Need to think and take a decision... By the way, is there any option in the research field other than biotech after Mbbs? I mean like taking up pathology after Mbbs as specialisation.. Just to get into research field? Because there's cut throat competition here in India for Post Graduate seats after Mbbs, since there are only one tenth the seats of Mbbs available for doing PG. So If I take Mbbs, There's very low probability of getting a PG seat, and think an Mbbs degree without PG is of no use, no? Which means if I take say any course having research as the primary objective, assuming such an option exists other than biotech,I may get a PG easily in that. It's the PG thingy mainly that is preventing me from entering Mbbs, other than the research reason. What have you planned for PG? Again thank you for taking the time to answer my Q

 

[hope4wp]

re: WC 100K Post Challenge - You Ready?!

How much i love light painting but I can't hold my phone steady with one hand and shake the mouse with the other without interrupting my steadiness :|

 

[sd173]

I adjusted it for 4s because it's dark in my room right now! And it takes another second for post processing

Seems slower . Maybe Nokia will release some new software that cuts the optimum shutter time down by a lot when they release the 1030.

 

[hope4wp]

re: WC 100K Post Challenge - You Ready?!

Thank you for the reply! Hmmm.... Now I've become more confused... Need to think and take a decision... By the way, is there any option in the research field other than biotech after Mbbs? I mean like taking up pathology after Mbbs as specialisation.. Just to get into research field? Because there's cut throat competition here in India for Post Graduate seats after Mbbs, since there are only one tenth the seats of Mbbs available for doing PG. So If I take Mbbs, There's very low probability of getting a PG seat, and think an Mbbs degree without PG is of no use, no? Which means if I take say any course having research as the primary objective, assuming such an option exists other than biotech,I may get a PG easily in that. It's the PG thingy mainly that is preventing me from entering Mbbs, other than the research reason. What have you planned for PG? Again thank you for taking the time to answer my Q

Maybe you could move to other countries? Like apply for U.S? That's what my brother did....it's easy in my country here to get admission in just anything....so haven't decided about pg! But yeah you can take up different specialization regarding what you wanna do....pathology is good but if you think you can get a seat for PG then go ahead and take mbbs....and biotech is a new field which might have more scope afterwards and regarding doctors there are millions out there

 

[hope4wp]

re: WC 100K Post Challenge - You Ready?!

Seems slower . Maybe Nokia will release some new software that cuts the optimum shutter time down by a lot when they release the 1030.

Uhhh that's just how light works? higher shutter speed...more light enters (dark room images need this)

 

[hope4wp]

re: WC 100K Post Challenge - You Ready?!

But I'd love to lower the saving time....

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

But I'd love to lower the saving time....

Well that get quicker with OS updates for sure.

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

Uhhh that's just how light works? higher shutter speed...more light enters (dark room images need this)

Oh duh. Another simple thing I didn't realize. I actually just tried to do make words with light thing like they did at the 1020 release event and it's so cool!

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

Oh duh. Another simple thing I didn't realize. I actually just tried to do make words with light thing like they did at the 1020 release event and it's so cool!

I'm not that good at it though.

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

Oh yeah some time ago I mentioned I was making a 3D model of my Surface Pro for a project in a 3D design class.






AWESOMEST PROJECT EVAR.

(I made it on my Surface Pro)

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

Oh yeah some time ago I mentioned I was making a 3D model of my Surface Pro for a project in a 3D design class.
View attachment 68345
View attachment 68346
View attachment 68347
View attachment 68348
View attachment 68349
View attachment 68350
AWESOMEST PROJECT EVAR.

(I made it on my Surface Pro)

The flaws with the design, 2 obvious, 1 not so obvious:

1&2:
The Windows logo on the kickstand and key characters on the keyboard are not there. Reason: It is way more complicated than it should be to add 2D pictures to the surface (pun not intended) of a 3D part.

3:
I was unable to capture the fingerprint grease on my keyboard and trackpad from never being able to fully clean it off so it just keeps adding up.

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

Oh yeah some time ago I mentioned I was making a 3D model of my Surface Pro for a project in a 3D design class.
View attachment 68345
View attachment 68346
View attachment 68347
View attachment 68348
View attachment 68349
View attachment 68350
AWESOMEST PROJECT EVAR.

(I made it on my Surface Pro)

nice 3d model

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

The flaws with the design, 2 obvious, 1 not so obvious:

1&2:
The Windows logo on the kickstand and key characters on the keyboard are not there. Reason: It is way more complicated than it should be to add 2D pictures to the surface (pun not intended) of a 3D part.

3:
I was unable to capture the fingerprint grease on my keyboard and trackpad from never being able to fully clean it off so it just keeps adding up.

what would your change from the current surface model ? :O

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

I really need to find a quieter fan .. I mean its quiet but when it gets hot it revs up and becomes super noisy. I would like to find one that is low profile but preforms well

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

blame it on the juice ;P

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

what would your change from the current surface model ? :O

That was actually an option we had for our project. Now that the Surface Pro 3 is out and it's influencing my ideas, I can't really remember what I would've done if I decided to make changes to it (I before the Pro 3 came out). I pretty much would've changed it to be a Pro 3 with front facing speakers and a better magnet to hold the stylus - except you can't really do that in a 3D design unless you have the models for the components that go inside.

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

I really need to find a quieter fan .. I mean its quiet but when it gets hot it revs up and becomes super noisy. I would like to find one that is low profile but preforms well

This is why I prefer tablet-laptops over desktops - no possible moving parts that could break on you or annoy you.

 

[sd173]

re: WC 100K Post Challenge - You Ready?!

The first day in so many months that I can sleep for as long as I want and I stay up past 1:00 AM. :|

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

hmmmmm ....... thinking

 

[sahib lopez]

re: WC 100K Post Challenge - You Ready?!

This is why I prefer tablet-laptops over desktops - no possible moving parts that could break on you or annoy you.

I like to upgrade my parts..... i prefer performance in a desktop