01-15-2021 07:00 AM
2,210 ... 878889
tools
  1. Grabber5.0's Avatar
    Is that something you could use to look at the deep innards of intake runners and cylinder head ports? That would be invaluable for porting and polishing.
    You certainly could get it through an intake runner. I will see if I can get to the intake ports on the old engine I have on the stand and snap some pics so you can see how it looks.
    01-08-2021 10:30 PM
  2. Grabber5.0's Avatar
    Best I could do with everything where it currently sits. Intake and exhaust ports are on a loose head under my workbench, the timing chain is via the distributor hole of an engine on a stand. It will also record video if needed. Edit: it seems Tapatalk messed up the attachments a bit. I don't see one of the ports. Those are two of the same port.

    raycpl and fatclue_98 like this.
    01-09-2021 12:51 AM
  3. fatclue_98's Avatar
    Best I could do with everything where it currently sits. Intake and exhaust ports are on a loose head under my workbench, the timing chain is via the distributor hole of an engine on a stand. It will also record video if needed. Edit: it seems Tapatalk messed up the attachments a bit. I don't see one of the ports. Those are two of the same port.

    [IMG=960x540]https://uploads.tapatalk-cdn.com/20210109/75d1d303189f1c8abb9bfd7eb0fb1e3f.jpg[/url][IMG=960x540]https://uploads.tapatalk-cdn.com/20210109/586441781a3de5f95411d15b80c8c49c.jpg[/url][IMG=960x540]https://uploads.tapatalk-cdn.com/20210109/eb9112c8c61d9d7fbd88617326ab9d55.jpg[/url][IMG=960x540]https://uploads.tapatalk-cdn.com/20210109/a89d45f847e2bb3729659967a94f326e.jpg[/url]
    Front-mounted distributor? Can you say Ford? I'm guessing Windsor V-8 of mid 70s vintage.
    Grabber5.0 likes this.
    01-09-2021 11:48 AM
  4. Grabber5.0's Avatar
    Front-mounted distributor? Can you say Ford? I'm guessing Windsor V-8 of mid 70s vintage.
    Winner winner It's the 302 from my old Maverick.
    fatclue_98 likes this.
    01-09-2021 12:29 PM
  5. Grabber5.0's Avatar
    Ask your granite top installer to install wood blocks on the underside of the top. He'll know what I'm talking about. Worst case scenario, he can core-drill two small holes and epoxy some 1/4" anchors. This is all assuming you're getting typical 1-3/8" thick tops. If you're getting the new-fangled 1/2" thick tops that simulate quartz then you have to put some form of brackets. Good luck.
    They installed the countertops today, and gave me a metal bracket that goes under the counter and screws to the cabinets on either side (or wall in my case on one side). I have to install a filler strip on one side first, as the dishwasher opening is 25", and the bracket is for a standard 24" opening. Next up: painting the cabinets!

    Don't mind the torn drywall paper that came off with the old countertop. That will be repaired and covered by the backsplash later on. I'd offer up an old banana, but my wife put them in smoothies this afternoon.
    01-13-2021 09:55 PM
  6. worldspy99's Avatar
    Blast from the past.
    A mint condition Lumia 950. Unlock request from AT&T approved in 5 minutes. Two updates later it's been a fun few hours. I even put a spare SIM in it. If Microsoft makes the new Edge available this phone should be able to go for two more years no sweat.
    20210113_212351.jpeg20210113_212412.jpeg
    aximtreo, libra89, HeyCori and 2 others like this.
    01-14-2021 12:26 AM
  7. worldspy99's Avatar
    The Lumia 950 came with an original Nokia wireless charger as well. Woot.
    20210113_212723.jpeg
    aximtreo, libra89, HeyCori and 1 others like this.
    01-14-2021 12:28 AM
  8. HeyCori's Avatar
    Niiiiiice!
    01-14-2021 02:08 PM
  9. Grabber5.0's Avatar
    Blast from the past.
    A mint condition Lumia 950. Unlock request from AT&T approved in 5 minutes. Two updates later it's been a fun few hours. I even put a spare SIM in it. If Microsoft makes the new Edge available this phone should be able to go for two more years no sweat.
    I'd be very surprised if the new Edge browser ever hits these phones. Windows Mobile is dead, isn't it? I haven't checked my 640 in a while..
    01-14-2021 03:35 PM
  10. johnlej's Avatar
    img_3336.jpg from the 60ties :-)
    01-15-2021 07:00 AM
2,210 ... 878889

Similar Threads

  1. Is OneDrive slowing down internet for rest of household?
    By Windows Central Question in forum Ask a Question
    Replies: 2
    Last Post: 03-16-2017, 06:37 PM
  2. Latest update to edge
    By rdubmu in forum Windows 10
    Replies: 2
    Last Post: 01-21-2017, 09:17 AM
  3. Lack of support for major apps
    By CoatsyJnr in forum Windows 10
    Replies: 3
    Last Post: 01-16-2017, 09:08 PM
  4. What means account professional affected by your organisation ?
    By Windows Central Question in forum Ask a Question
    Replies: 2
    Last Post: 01-16-2017, 01:28 PM
LINK TO POST COPIED TO CLIPBOARD