Lumia 929 icon "not for resale"

[Alexander Adnu]

Please, help me. My phone Lumia 929 when starts show "not for resale" and I cannot update to windows phone 8.1.

 

[ven07]

This device was probably a store demo model :/

 

[Alexander Adnu]

Perhaps there is a way to turn off a demo the mode?

 

[Starboy21]

Wdrt may help..not so sure but u cud giv it a try..

 

[Alexander Adnu]

I did try it and cd thor2 (cmd) but it's not work.

 

[ven07]

WDRT definitely won't help. I believe the store demo models have limited features, because they're mostly meant to be a demonstration

 

[Alexander Adnu]

And what if replace the motherboard from 930? It is possible, how do you think?

 

[Alexander Adnu]

Still I have noticed that after sending files to cloudy storage (process of sending can be tracked) they can't be found there. They disappear.

 

[anon(10197358)]

@Alexander Adnu

What's the error with thor2 ? 0xFA001106 ?

 

[Alexander Adnu]

Thor2 work. Successful. Product code edit. Wdrt find phone and download firewave. But then it shows that phone does not support.

 

[anon(10197358)]

@Alexander Adnu

In case you didn't understand it, can you provide we, plz, the thor2_win_xxxxxxxxxxxxxx_ThreadId-xxxx.log files, located in C:\Users\YourUserName\AppData\Local\Temp path ? This will provide more informations.

 

[Alexander Adnu]

[10:09:32.051] D_MSG : THOR2 1.8.2.18
[10:09:32.051] D_MSG : Built for Windows @ 13:36:46 Jun 16 2015
[10:09:32.051] D_MSG : Thor2 is running on Windows of version 6.1
[10:09:32.052] D_MSG : C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool\thor2.exe -mode vpl -vplfile C:\ProgramData\Microsoft\Packages\Products\RM-927\RM927_059S694_02540.00019.15024.38022_3570.vpl -skip_exit_on_post_op_failure -disable_stdout_buffering -conn 0.1D00:0004:0001 -maxtransfersizekb 128 -reboot
[10:09:32.052] D_MSG : Process started Mon Jun 05 10:09:32 2017
[10:09:32.053] D_MSG : Parsing VPL file C:\ProgramData\Microsoft\Packages\Products\RM-927\RM927_059S694_02540.00019.15024.38022_3570.vpl
[10:09:32.055] D_MSG : Successfully parsed VPL
[10:09:32.056] D_MSG : Flashing .ffu file RM927_02540.00019.15024.38022_RETAIL_prod_signed_100_018D82_VZW-US.ffu (SW version 02540.00019.15024.38022)
[10:09:32.056] D_MSG : Debugging enabled for uefiflash

[10:09:32.056] D_MSG : Initiating FFU flash operation
[10:09:32.056] D_MSG : WinUSB in use.
[10:09:32.063] D_MSG : isDeviceInNcsdMode
[10:09:32.063] D_MSG : isDeviceInNcsdMode is false
[10:09:32.064] D_MSG : Device mode 6 Uefi mode
[10:09:32.064] D_MSG : [THOR2_flash_state] Pre-programming operations
[10:09:32.064] D_MSG : Disable timeouts
[10:09:32.064] D_MSG : Get flashing parameters
[10:09:32.083] D_MSG : Lumia Flash detected
[10:09:32.083] D_MSG : Protocol version 2.20 Implementation version 2.36
[10:09:32.084] D_MSG : Size of one transfer is 2363392
[10:09:32.084] D_MSG : Size of buffer is 2359296
[10:09:32.084] D_MSG : Number of eMMC sectors: 61071360
[10:09:32.084] D_MSG : Platform ID of device: Nokia.MSM8974.P6039.2.2
[10:09:32.084] D_MSG : Async protocol version: 01
[10:09:32.084] D_MSG : Security info:
[10:09:32.084] D_MSG : Platform secure boot enabled
[10:09:32.084] D_MSG : Secure FFU enabled
[10:09:32.084] D_MSG : JTAG eFuse not blown
[10:09:32.084] D_MSG : RDC found
[10:09:32.084] D_MSG : Authentication not done
[10:09:32.084] D_MSG : UEFI secure boot enabled
[10:09:32.084] D_MSG : SHK disabled
[10:09:32.084] D_MSG : Device supports FFU protocols: 0015
[10:09:32.085] D_MSG : [THOR2_flash_state] Device programming started
[10:09:32.085] D_MSG : Using secure flash method
[10:09:32.085] D_MSG : CoreProgrammer version 2015.06.10.001.
[10:09:32.085] D_MSG : Start programming signed ffu file C:\ProgramData\Microsoft\Packages\Products\RM-927\RM927_02540.00019.15024.38022_RETAIL_prod_signed_100_018D82_VZW-US.ffu
[10:09:32.085] D_MSG : FfuReader version is 2015061501
[10:09:32.085] D_MSG : Send FlashApp write parameter: 0x4d544f00
[10:09:32.085] D_MSG : Perform handshake with UEFI...
[10:09:32.104] D_MSG : Flash app: Protocol Version 2.20 Implementation Version 2.36
[10:09:32.104] D_MSG : DevicePlatformInfo: Nokia.MSM8974.P6039.2.2
[10:09:32.104] D_MSG : Unknown sub block detected. Skip...
[10:09:32.104] D_MSG : Unknown sub block detected. Skip...
[10:09:32.104] D_MSG : Supported protocol versions bitmap is 15
[10:09:32.104] D_MSG : Secure FFU sync version 1 supported.
[10:09:32.104] D_MSG : Secure FFU async version 1 supported.
[10:09:32.105] D_MSG : Secure FFU sync version 2 supported.
[10:09:32.105] D_MSG : Secure FFU async version 2 supported.
[10:09:32.105] D_MSG : Get CID of the device...
[10:09:32.105] D_MSG : Get EMMC size of the device...
[10:09:32.105] D_MSG : Emmc size in sectors: 61071360
[10:09:32.105] D_MSG : CID: Samsung, Size 29820 MB
[10:09:32.105] D_MSG : Start charging...
[10:09:32.105] D_ERR : Requested write param 0x43485247 is not supported by this flash app version.
[10:09:32.106] D_MSG : Start charging... DONE. Status = 0
[10:09:32.362] D_MSG : ConnSpeedEcho: Elapsed= 0.253000, EchoSpeed= 26.68, Transferred= 7077918 bytes
[10:09:32.362] D_MSG : Get security Status...
[10:09:32.363] D_MSG : Security Status:
[10:09:32.364] D_MSG : Platform secure boot is enabled.
[10:09:32.365] D_MSG : Secure eFUSE is enabled.
[10:09:32.365] D_MSG : JTAG is enabled.
[10:09:32.365] D_MSG : RDC exists in the device.
[10:09:32.365] D_MSG : Authentication is not done.
[10:09:32.365] D_MSG : UEFI secure boot is enabled.
[10:09:32.365] D_MSG : Secondary HW key is missing.
[10:09:32.365] D_MSG : Get RKH of the device...
[10:09:32.366] D_MSG : RKH of the device is 24227AEE093862F0D3BF26A38C97CCEE7E9EF9351E0D507B1B4B606CE5769CD0
[10:09:32.366] D_MSG : Get ISSW Version...
[10:09:32.366] D_MSG : Get ISSW Version, SKIPPED!
[10:09:32.367] D_MSG : Get system memory size...
[10:09:32.368] D_MSG : Size of system mem: 2097152 KB
[10:09:32.368] D_MSG : Read antitheft status...
[10:09:32.369] D_ERR : Requested read param 0x41545250 is not supported by this flash app version.
[10:09:32.369] D_MSG : Send backup to RAM req...
[10:09:32.562] D_MSG : Clearing the backup GPT, startsector = 61071326
[10:09:33.074] D_MSG : Successfully parsed FFU file. Header size: 0x000e0000, Payload size: 0x0000000067b00000, Chunk size: 0x00020000, Header offset: 0x00000000, Payload offset: 0x00000000000e0000
[10:09:33.075] D_MSG : RKH match between device and FFU file!
[10:09:33.076] D_MSG : Option: Skip CRC32 check in use
[10:09:33.077] D_MSG : Start sending header data...
[10:09:33.235] D_ERR : FlashApp returned reported error in SecureFlashResp!
[10:09:33.277] D_ERR : Status: 0x1106, Specifier: 0x8000001A
[10:09:33.277] D_ERR : FA_ERR_FFU_SEC_HDR_VALIDATION_FAIL
[10:09:33.278] D_ERR : Send of FFU header failed!
[10:09:33.278] D_MSG : [IN] programSecureFfuFile. Closing C:\ProgramData\Microsoft\Packages\Products\RM-927\RM927_02540.00019.15024.38022_RETAIL_prod_signed_100_018D82_VZW-US.ffu
[10:09:33.278] D_ERR : programming operation failed!
[10:09:33.278] D_MSG : Rebooting device
[10:09:33.278] D_MSG : Sending reset command to device
[10:09:33.278] D_MSG : Reset command sent successfully.
[10:09:33.295] D_MSG : Operation took about 1.00 second.
[10:09:33.296] D_ERR : THOR2 1.8.2.18 exited with error code -100658938 (0xFA001106)

Is it? Right?

 

[Alexander Adnu]

 

[Alexander Adnu]

Theres also messege above the NOKIA logo when youre launching phone "rbmpprovisioner: ProvisioniRPMB... rpmbprovisioner: Skipping RPMB Provisioning... "

 

[anon(10197358)]

@Alexander Adnu

Not For Resale at boot + 0xFA001106 when you try to flash, indicate for me that your device is a proto.

 

[Alexander Adnu]

I am sorry, are you asking me whose is that device? It's my if I understand you corrently.
@DylanCochard

 

[Alexander Adnu]

Okay) now I understand. Proto. This means that my device will fail to flash?

 

[anon(10197358)]

@Alexander Adnu

Protos can't be flashed. I'm not sure if your device is a proto, but that's what I think.

 

[Alexander Adnu]

@DylanCochard

Thank you very much. I will try find another way. Or just remove the motherboard.

 

[Alexander Adnu]

By the way, on phone the application which can't be removed in no way is installed.
zDUV and it has two mode: 1 retail mode 1 win USB video mode