Screen replacement and issues with digitizer

[StuBeck]

I cracked the screen on my 920 about 2 months after getting it, and have finally gotten around to replacing the screen. I did the same on my wife's 920 and didn't have any issues. With this one, the first time the digitizer simply wouldn't work. Now it will work sometimes, but require a reboot when it decides not to. Also, the lights on the three soft buttons do not turn on at all anymore, nor does double tap to wake. Do I have a bum digitizer? I've restated the cable a few times for the digitizer and haven't been able to get it working back to normal. Thanks for any tips.

 

[DBDev]

I would guess your digitizer is bad

 

[WanderingTraveler]

It's either the digitizer, the cable or some kind of software issue if all it takes to temporarily fix it is a reboot.

The capacitive keys not lighting up may also be an issue caused by the screen replacement, and you may have damaged the proximity sensor while doing so.

 

[StuBeck]

To follow up, the screen was the issue. A new one fixed it. Unfortunately, as I was putting the new screen on, I also let a speck underneath the screen :|