06-25-2015 03:29 PM
46 12
tools
  1. neo158's Avatar
    Updating to build 10130 made my wi-fi unusable, my laptop has no internet access and restarting (6-7 times) and still nothing is fixed. Keep away from this build, or you might get some nasty surprises.
    Or you can do the sensible thing and use a VM and not have all that hassle.
    05-30-2015 10:13 AM
  2. TwistedSenses's Avatar
    Or you can do the sensible thing and use a VM and not have all that hassle.
    Fortunately rolling back to a previous build is easy and fixes all the issues.
    05-30-2015 10:43 AM
  3. mj0's Avatar
    Updated from Build 10074 to 10130 and it went well so far. Took about 1.5 hours in total. Wifi wasn't working in the beginning but for some reason it connected about three minutes after first startup. The PIN for my account still exists but Windows doesn't offer me to use it for login/unlock. Project Spartan / Edge is still pretty slow (especially startup is horrible).

    Otherwise it looks pretty good. I'll start looking for fixed and new bugs now.
    05-30-2015 10:52 AM
  4. mj0's Avatar
    Wasn't the power button in the start menu supposed to be at the top? Mine is still at the bottom, right between "All apps" and "Settings".
    05-30-2015 11:11 AM
  5. Tom Kufeldt's Avatar
    That was the behavior I expected but it didn't happen. In fact, I tried to replace the Basic Driver by deleting it from the DMgr and rescanning or updating it but Windows tells me it is the correct driver. So now I have a low res system with two mirrored monitors.
    05-30-2015 11:14 AM
  6. neo158's Avatar
    Wasn't the power button in the start menu supposed to be at the top? Mine is still at the bottom, right between "All apps" and "Settings".
    Nope, that was changed in build 10122.
    05-30-2015 11:47 AM
  7. mj0's Avatar
    So it was at the bottom in 10074, then put at the top somewhen afterwards, then back at the bottom again in 10122?
    05-30-2015 11:56 AM
  8. s1ncity's Avatar
    I have installed 10074 a few times and on different machines and all worked well . Update to 10122 was successful and worked well . For various reasons I have reinstalled , a few times , 10074 on this machine >> intel q 6600 , Asus striker extreme mobo , not extreme 2 , HD5670 graphics .
    For some reason after update to 10122 and then update to 10130 I get stuck in a boot loop . I have hoped that letting it loop numerous times would help , but to no avail .
    The same has happened when I install 10074 and try update to 10130 , same boot loop . I get the windows flag on the screen then it reboots .
    Rebooting to the Install image ( DVD Rom ) , and trying roll back it fails , with a message that the roll back failed , refresh fails too . Maybe just this old hardware , but thought it best to throw it out there if someone on similar hardware is experiencing the same/similar .

    I have 10074 , updated to 10122 on an old HP mobo and intel extreme CPU and is working well , not tried the update to 10130 on that machine yet .

    When I get the time I'm going to put 10074 on my everyday machine , will put the specs up when I report success or fail .
    05-30-2015 01:24 PM
  9. s1ncity's Avatar
    On the last line I should have added that 10074 was to be installed , with the intention of updating to latest build , seeing as the update to latest build seems to be an issue.
    05-30-2015 01:39 PM
  10. neo158's Avatar
    So it was at the bottom in 10074, then put at the top somewhen afterwards, then back at the bottom again in 10122?
    No, it was put at the bottom in build 10074 and that's where its stayed since then.
    05-30-2015 02:19 PM
  11. RonV42's Avatar
    Having issue where PIN is not showing up at login. Also Windows Hello wont load to all me to re-install my fingerprint reader. No slider to disable/enable PIN in in control panel. Setting up Windows Hello from account settings freezes up the control panel app.
    05-30-2015 02:32 PM
  12. mj0's Avatar
    Same here, PIN doesn't work in 10130. Neither does resetting/removing the PIN. It keeps asking for my Microsoft account password over and over again.
    05-30-2015 03:24 PM
  13. Nichifor Bogdan's Avatar
    Same problem with atihdwt6.sys. My other problem is that I can't boot in safe mode my hp probook 6540b amd in order to disable the driver. Loop error... Any solution?
    05-30-2015 04:17 PM
  14. Jammin1108's Avatar
    anyone else having problems with media and flash in build 10130?
    05-31-2015 12:57 AM
  15. udayk's Avatar
    Initial impressions:

    Start menu opens 9 out of 10 times
    Blank icons in the task bar working fine now.
    Still a slight delay in opening Networks flyout
    App crashing on load is significantly diminished.
    05-31-2015 06:00 AM
  16. Cara Patricia Canlas's Avatar
    build 10130 audio error - lennovo G50 70

    solution:
    you need to lower the default format same rates for sound to work (its not as good quality)
    >right click on the volume iron in system tray
    /click on playback devices
    /speakers for your sound device
    /click properties button
    /go advanced
    >select 16 bit, 96000 Hz (studio), test

    hope this help... :)
    05-31-2015 12:28 PM
  17. Andy Owen2's Avatar
    I found the same problem with ATIHDWT6.SYS. Only fixed by reverting to 10122, but now the start button is stuffed (previously, 10122 was the first build where the start menu was getting somewhere close to working) and refuses to do anything at all.
    06-01-2015 03:48 AM
  18. greg10e's Avatar
    My PC won't run Preview 10130 (or the previous build 10124 for that matter).
    My MD Radeon 9300 drivers can't handle it, and either crap out the screen or terminate in BSOD. Gone to terminal BSOD now and won't start up even using System Restore. The first time this happened, I wiped the HDD and did a fresh install from 10074(?) iso, then updated to 10130. Started up okay, even though start menu was transparent until you re-tried a few times.
    After installing some basic apps, drivers gave up and BSODed me.
    Managed to system restore once, but the second time it happened I couldn't recover any more.
    06-02-2015 09:36 PM
  19. Nelu Mircea Florea's Avatar
    hello everyone!
    I try to instal 10130 and the windows dosen't work for me, the windows just crash , this is not first time when i try to instal 10130, now i will go back at windows 8.My pc just restarting when windows logo appeared, first time he made this all nigth becouse i was sleeping :P.
    my configuration of pc is : motherboard - asrock 4 core 1600 twins P350 , 4 gb ram ddr3, intel core 2dou at 2.66 ghz with 6 mb cache, nvidia 9600 512 mb/256 bitt and sound card creative fatality pro 1. can somebody help me with this probleme?
    06-07-2015 04:13 AM
  20. cw1988's Avatar
    This is why msft released the latest build as iso - there is a bug with the proper release channel.
    06-07-2015 04:32 AM
  21. Neil Anderson3's Avatar
    I installed it on my Macbook Pro in Parallels every thing working well up to now.:-)
    06-25-2015 03:29 PM
46 12

Similar Threads

  1. This year's E3 will finally let up to 5,000 members of the public attend
    By WindowsCentral.com in forum Windows Central News Discussion
    Replies: 0
    Last Post: 05-29-2015, 04:11 PM
  2. Hands-on with WhatsApp Calling for Windows Phone
    By WindowsCentral.com in forum Windows Central News Discussion
    Replies: 0
    Last Post: 05-29-2015, 03:11 PM
  3. Windows 10
    By Pratyushsingh in forum Ask a Question
    Replies: 2
    Last Post: 05-29-2015, 02:42 PM
  4. Windows 10 PC preview build 10122 gets two more security patches
    By WindowsCentral.com in forum Windows Central News Discussion
    Replies: 0
    Last Post: 05-29-2015, 02:30 PM
  5. Pick up the T-Mobile Lumia 435 from Walmart for $50
    By WindowsCentral.com in forum Windows Central News Discussion
    Replies: 0
    Last Post: 05-29-2015, 01:30 PM
LINK TO POST COPIED TO CLIPBOARD