[enjoyfebruary]

So I got the OEM Nokia Qi charging back for my Lumia 810 yesterday and I just wasn't happy with the added 2mm or so. Call me OCD I know. So this morning I proceeded to move the Qi coil into the slimmer back that comes with the 810. It was super easy and just took about 15 minutes of patience and a small flat head screw driver. The breakdown process is fairly straightforward so I won't go into details. You can see from the pictures what parts came out of the back. On the standard back I removed the little spongy pad. Also there is a little black piece of plastic on the back side of the 4 pin connector. You'll need to pull that little plastic piece off to get the case to be flush with the frame around the screen. **The only thing i've noticed is that its range of movement on the charging pad has gone down. I assume this is due to the removal of the silverish pad on top of the coil which probably helps in that regard**. It could just be combination of that and the smallish size of the Nokia Qi charging pad. Other than that, charging works great and no extra thickness.

**EDIT - I had to reapply that silver pad to the coil as I was noticing the charger was quickly disconnecting and then reconnecting if the phone was not completely centered on the pad. Now it works perfectly anywhere on the pad.


Thanks for reading!
Dan

[Black Helicopter Steve]

Coolness.

[waazzupppp]

Without the proper insulation and thicker plastic, won't a mod like this melt the soft coat off the back of the cover like this?

[enjoyfebruary]

Without the proper insulation and thicker plastic, won't a mod like this melt the soft coat off the back of the cover like this?

I've been using the modified back solid for two days now and I can say at this point that I haven't felt the back get any hotter than if I had the phone in my pocket. Obviously there is some heat generated with the Qi system that is inherit to the technology but definitely not anywhere near as hot as it would have to be to melt the plastic. Not even close. Also, without any specific measurements the Qi Back and Standard back feel to be the same thickness in terms of the plastic they used. Confusingly they added some additional frame parts into the Qi Back which makes the back thicker. I'm not an engineer so there may be some specific details that I'm missing but it charges fine and in my experience does not get to any sort of high heat. So thats good enough for me.

Dan

[metalchick719]

Wow... I'm impressed that you were able to do this. I wouldn't even attempt it because I'd probably ruin both covers and the charging mechanism. I have the cyan charging cover, so I know what you mean about the extra depth. I've been using it sporadically and find myself preferring the black slimmer cover the phone came with just because it makes it thinner and lighter.

[PLGomez]

Hey, has anyone else tried this yet? enjoyfebruary, How's it holding up? If only we had a blue slim cover to try it with too...

[enjoyfebruary]

Hey, has anyone else tried this yet? enjoyfebruary, How's it holding up? If only we had a blue slim cover to try it with too...

Holding up great. Absolutely 0 issues. No extra heat or flaking of the rubber coating. Super happy with it.

[PLGomez]

I just tried it and it took maybe 5 min. It's working great!

[PLGomez]

I wonder if it'll work on the generic ebay ones. I have the cyan too but I want it and other colors slim ;-)

[PLGomez]

Also, what bothered me most about the wireless shell is that it left a little gap between the camera and the shell. Now it's flush again like with the original shell.

[andraeseus]

would anyone be willing to post instructions

[Mandroid#AC]

Also interested in doing this, we'll see how it goes. I have the cyan charging shell, but really want white so might paint my original slim black shell and transfer the qi over to it. Will post pics as soon as I get around to doing it lol.

[PB_H]

Cool !
How did you attach the pad it's just look likes it's laying there ?
Also wondering if the pad from a 820 charging back would fit and work,
they use the same battery and you can get the 820 charging back for $25.

[PLGomez]

The pad just sticks with the original adhesive. I'm sure the 820 pad should work as well. Let us know if it works out for you.

[bozza72]

Question, if you guys can do this and it works fine why the F is the charging back bought from nokia so f,ing heavy & big ???

ps sorry dont know why i needed to swear so much in this post :)

[Guzzler3]

Question, if you guys can do this and it works fine why the F is the charging back bought from nokia so f,ing heavy & big ???

ps sorry dont know why i needed to swear so much in this post :)

As I said before, using the QI wireless charging generates heat. Nokia put a foam insulating pad between the QI coil and the battery to protect the battery from the heat. Doing so, they had to make the shell a bit thicker and heavier.

Heat and LiPo batteries don't go together very well. When the battery gets hot, it's life expectancy goes down. The one saving grace is the battery is replaceable on this phone.

[PB_H]

Qi you mean Qmobile...

no, Qi Wireless Power Consortium

[mschmi02]

BTW, I've got a 810 wireless charging shell for sale if anyone is looking for one to use as-is, or with this mod:

Nokia Lumia 810 Wireless Charging Shell CC 3063 Black Excellent Condition | eBay

[Mandroid#AC]

Well, I think I damaged my Qi, light on the charger comes on but doesn't charge my device, tried different placements thinking I wasn't getting good contact but still nothing....advice?

Edit: Nevermind, put the Qi upside down on the battery to make sure it was making contact with the pins and put the cover on over it lol, all good!

[PB_H]

Well, I think I damaged my Qi, light on the charger comes on but doesn't charge my device, tried different placements thinking I wasn't getting good contact but still nothing....advice?

Edit: Nevermind, put the Qi upside down on the battery to make sure it was making contact with the pins and put the cover on over it lol, all good!

Thank God I can finally get some sleep !

[Mandroid#AC]

Thank God I can finally get some sleep !

I'm happy for you, sleep is very important!

[xtsubarublazin]

Thank you for this mod. It's great. I just executed it last night. Took me a few tries to get the charging pad perfectly aligned to the four pins on the phone but I finally got it. I also had purchased some cheap cases from eBay, but they only fit on the original shell, so now I can use them. The best part is, even with one of the cases on, I can still wirelessly charge the phone with the same charging rates as before.

[PanthersDen]

If anyone is interested:
The same thing works with the Lumia 820.
I transplanted the wireless charging elements of a thick cyan wireless charging shell onto a thin white non wireless charging shell.
Naturally the case has become a bit tighter now, but everythings works fine.

How did you fit the 820 onto the 810 shell? The 820 charging pins are on the bottom while it's on the side on the 810's. Can you post some pics of how you fit it? I'm thinking of doing this too using the 820.

*edit: oh, you mean you went from thick 820 to thin 820 case don't you?

[pizzaboy192]

Hi everyone. I just won an 810 on eBay. Gonna miss my WiFi calling (gonna keep my 521 for that until someone finds how to sideload the WiFi calling from it)

Did some digging, the 810 charging shells are almost impossible to find, but there's These buggers for the SGS3, 4 and Note. I'm thinking of picking up one that most resembles the layout of the 810's charging pins, and slapping it in. Should save me a few bucks and won't make me feel bad about ripping apart a rare accessory.

Ideas?

[PB_H]

Hi everyone. I just won an 810 on eBay. Gonna miss my WiFi calling (gonna keep my 521 for that until someone finds how to sideload the WiFi calling from it)

Did some digging, the 810 charging shells are almost impossible to find, but there's These buggers for the SGS3, 4 and Note. I'm thinking of picking up one that most resembles the layout of the 810's charging pins, and slapping it in. Should save me a few bucks and won't make me feel bad about ripping apart a rare accessory.

Ideas?

You can get Nokia Lumia 810 original charging shells here Nokia Repair Parts - Nokia Lumia 810 (T-Mobile Version) - Parts4repair.Com
about $30. incl shipping