1. StuBeck's Avatar
    I cracked the screen on my 920 about 2 months after getting it, and have finally gotten around to replacing the screen. I did the same on my wife's 920 and didn't have any issues. With this one, the first time the digitizer simply wouldn't work. Now it will work sometimes, but require a reboot when it decides not to. Also, the lights on the three soft buttons do not turn on at all anymore, nor does double tap to wake. Do I have a bum digitizer? I've restated the cable a few times for the digitizer and haven't been able to get it working back to normal. Thanks for any tips.
    12-31-2013 08:33 AM
  2. DBDev's Avatar
    I would guess your digitizer is bad
    WanderingTraveler likes this.
    12-31-2013 09:05 AM
  3. WanderingTraveler's Avatar
    It's either the digitizer, the cable or some kind of software issue if all it takes to temporarily fix it is a reboot.

    The capacitive keys not lighting up may also be an issue caused by the screen replacement, and you may have damaged the proximity sensor while doing so.
    paulxxwall likes this.
    12-31-2013 09:15 AM
  4. StuBeck's Avatar
    To follow up, the screen was the issue. A new one fixed it. Unfortunately, as I was putting the new screen on, I also let a speck underneath the screen :|
    01-06-2014 09:23 PM

Similar Threads

  1. Horizontal lines flash briefly on screen
    By bmacke in forum Microsoft Surface Laptop
    Replies: 4
    Last Post: 01-02-2014, 10:07 AM
  2. "Countdown" app with toasts
    By Loco5150 in forum General Phone Discussion
    Replies: 2
    Last Post: 01-01-2014, 05:13 PM
  3. [App dev unlock] Digital Clock Tile
    By xtrose in forum App Spotlight
    Replies: 3
    Last Post: 12-31-2013, 11:01 AM
  4. Chances of Lumia Phablet with 41 megapixel ??
    By njnbat in forum Other Operating Systems
    Replies: 4
    Last Post: 12-31-2013, 08:40 AM
  5. Settings and storage
    By FAHMI BASSEM in forum Other Operating Systems
    Replies: 3
    Last Post: 12-31-2013, 06:02 AM