1. kepner198's Avatar
    Warning to anyone interested in the Nokia CP-627 cover for your Lumia 830: it makes the wireless charging experience much worse. Both my Nokia DT-903 and my CR-201 chargers have a lot of trouble detecting my phone now. Last night, I thought my phone was charging (the DT-903 light was solid), but it didn't charge my phone at all. It's a huge pain. Strangely, I also have a QiStone+, and it charges the 830 with the CP-627 just fine. As nice as the CP-627 flip case is, I'd rather have wireless charging that works reliably, so back to the regular AT&T back plates for me.
    Derausgewanderte likes this.
    11-19-2014 01:01 PM
  2. Derausgewanderte's Avatar
    interesting, just ordered mine from the MS Store. Will see how that works with 3 different types of wireless chargers and report back. If this is an issue I will return to MS.
    11-19-2014 02:46 PM
  3. IlyaBu's Avatar
    FWIW, I wound this to be a pretty easy "fix"; the leads on the inside of the case from the wireless charging pad to where they need to be positioned in order to make contact with the pins on the phone (sorry if that doesn't make sense, kind of hard to explain) are just glued on to the back of the case, and can easily move just a bit to one side, in which case they can make poor contact with the pins. if one of the leads makes intermittently poor contact the charging will intermittently not work. This was the case for me. Moving one of the leads slightly, and if needed using a bit more glue to secure it, proved to be a permanent and easy fix.
    Derausgewanderte and xandros9 like this.
    11-19-2014 05:07 PM
  4. Derausgewanderte's Avatar
    good to know, thanks IlyaBu
    11-19-2014 07:06 PM
  5. lantern20's Avatar
    One thing to note the pins are delicate and can easily break. That happened to me with my 1020 wireless charging plate while trying to adjust them to make better contact.
    Sent from my RM-877_nam_att_205 using Tapatalk
    11-25-2014 05:03 AM
  6. Derausgewanderte's Avatar
    Received mine. Didn't even try out with chargers. It looks nice, but the front cover was too wobbly for me. The fact that most of the speaker in the back was covered was another minus. It sounded very muffled. I returned it the same day.
    kepner198 likes this.
    11-26-2014 03:59 PM
  7. kepner198's Avatar
    It looks nice, but the front cover was too wobbly for me. The fact that most of the speaker in the back was covered was another minus.
    Yeah. It was a cool idea, but not well executed in my opinion.
    11-28-2014 09:07 PM
  8. R3DH3R0's Avatar
    I got mine to work for a little bit, now it doesn't work at all. My 2 regular back plates work fine though.
    11-29-2014 01:19 AM
  9. R3DH3R0's Avatar
    UPDATE (not too much later): Oddly enough the cp627 works fine with both my DT-910 chargers..... When the case is flipped around (inside flap against the charger). I don't get it, but it works. For me at least.
    11-29-2014 01:30 AM
  10. Deepak's Avatar
    Does CP-627 have "any" NOKIA branding at the front or back of the flip shell?? Without the branding, CP-627 looks very cheap and ugly! :(
    12-29-2014 07:27 AM
  11. Marty89's Avatar
    Does CP-627 have "any" NOKIA branding at the front or back of the flip shell?? Without the branding, CP-627 looks very cheap and ugly! :(
    Only at the top of the front. I was afraid it would look ugly without NOKIA brand on the back, but actually it doesn't. And also the sound from the speaker sounds the same as with regular back cover.
    12-29-2014 05:31 PM
  12. Deepak's Avatar
    Only at the top of the front. I was afraid it would look ugly without NOKIA brand on the back, but actually it doesn't. And also the sound from the speaker sounds the same as with regular back cover.
    Never mind. I have opted for another tough and better flip cover with stand. Moreover, Nokia (aka Msft now) simply charges more under it's brand name! There are other better options available on the market,.... only if absence of "NOKIA" branding doesn't bother much
    12-30-2014 07:18 AM
  13. tonyjkent's Avatar
    This accessory doesn't work well at all for me. I've tried it on two different charging pads without much success. It's really picky about where you place it on the pad (compared to the regular wireless charging back cover that came with the phone). When I do get it positioned correctly, the phone says its charging, but the battery level doesn't increase at all (even after 6 hours). I returned the first flip cover to the Microsoft store and got a replacement but the replacement has the same problem. I have the AT&T variant of the 830. .
    01-01-2015 11:42 PM
  14. Ejay Lozano's Avatar
    I have a black CP-627 and it's been working fine on my DT-910, DT-900 and CR-200. On the CR-200, I have to flip the cover back and clamp the phone on to the holder. It doesn't charge the phone with the flap on the screen, I found that kinda weird.
    03-20-2015 03:26 AM
  15. Kebero's Avatar
    I have a green shell, and it works fine on my OG plates and OG stand.

    Sent from my Lumia 830
    03-23-2015 04:19 PM

Similar Threads

  1. Join the Windows Phone beta for comic reader Cover
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 1
    Last Post: 11-18-2014, 09:08 PM
  2. Wired v wireless charging affects discharge rate?
    By DBOP in forum Windows Phones
    Replies: 6
    Last Post: 11-18-2014, 08:56 PM
  3. Review Toast wood cover for Surface Pro 3
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 11-17-2014, 03:42 PM
  4. Why is my phone not charging as fast as it was before the 14203 update?
    By Windows Central Question in forum Ask a Question
    Replies: 2
    Last Post: 11-17-2014, 01:31 PM
  5. These classy Lumia 1520 flip cases are 40% off today while supplies last!
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 11-17-2014, 09:00 AM
LINK TO POST COPIED TO CLIPBOARD