1. OneMarcilV's Avatar
    My Ecotank printer prints lines when printing a dark image. Did the head cleaning ordeal. That worked when I did this two tines in a row. About a seek ago. Now I see lines again.

    05-10-2022 01:54 PM
  2. interlocutor1980's Avatar
    1. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
    2. Make sure the paper type setting matches the type of paper you loaded.
    3. Make sure you loaded the printable side of the paper correctly for your product.
    4. Turn off any high speed settings in your product software.
    5. Align the print head.
    6. You may need to replace the ink cartridges.
    05-11-2022 11:59 AM
  3. OneMarcilV's Avatar
    1. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
    2. Make sure the paper type setting matches the type of paper you loaded.
    3. Make sure you loaded the printable side of the paper correctly for your product.
    4. Turn off any high speed settings in your product software.
    5. Align the print head.
    6. You may need to replace the ink cartridges.
    The paper matches if not the printer would let me know. I did the nozzle check and cleaned the print head.

    Like I wrote if I do this twice the printer prints without any lines.

    Does not have cartridges. Has tanks ink is held that is why the name Ecotank.
    05-11-2022 03:08 PM

Similar Threads

  1. Anker's first 3D Printer promises a lot in its new Kickstarter
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 04-06-2022, 10:42 AM
  2. Anycubic's 3D printer portfolio expands with Kobra and M3 series
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 03-30-2022, 08:50 AM
  3. Snag up to $330 off these Anycubic 3D printers
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 02-15-2022, 11:11 AM
  4. HoloLens 3 is canceled and the line's future is unclear, says report
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 02-02-2022, 04:00 PM
  5. Forza Street is crossing the finish line and closing down later this year
    By WindowsCentral.com in forum Windows Central News Discussion & Contests
    Replies: 0
    Last Post: 01-10-2022, 01:00 PM
LINK TO POST COPIED TO CLIPBOARD