Nokia RM-937 Charging Plate

[5150 Joker]

For those of you that have the RM-937, which charging plate are you using? The DT-900 is too small and the DC 50 isn't available yet in the US. Even a non-Nokia yellow pad would be nice.

 

[Pontifex]

Doesn't the DT-900 work with the 1520??

 

[5150 Joker]

It might but it's a bit too small

Sent from my GT-I9100

 

[ezeuzo1]

I use the Ravpower wireless charging plate

 

[ezeuzo1]

Here's the link:
Amazon.com: RAVPower? Wireless Charger Charging Pad Qi-Enabled USB Charger Phone Charger for Nexus 5 / 7 / 4; Samsung Galaxy S4, S3, Note3, Note2; Droid Charge; LG Optimus LTE2, Spectrum; HTC Rezound, Incredible 2, Incredible 4 LTE; Motorola Droid 4;

 

[Lundon44]

I still have my Nokia charging stand from my 920 and it works and the 1520 still stand up on it no problem. The stand ends around 2/3 of the way up the 1520.

 

[5150 Joker]

Yeah so I ended up buying the Nokia stand in black. So far it works great! Thanks for the suggestions.

 

[Lundon44]

Yeah so I ended up buying the Nokia stand in black. So far it works great! Thanks for the suggestions.

No problem! Enjoy!

 

[disqusword9press]

It is my understanding that Lumia 1520 (AT&T-US version) will not work with Qi-wireless standard devices at all. AT&T’s Lumia 1520 will only work with devices that are PMA wireless standard and you basically have to get it from US side because AT&T’s Lumia 1520 is a special made phone for US consumers. So, make sure you read the carefully the specs of the wireless-charging device you want to buy for your Lumia 1520 and it must say: ‘PMA standard’

If you are brave enough you should be able to modify your Lumia 1520 to make it compatible with Qi-wireless charging devices. Here is the article, check it out:

[- DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells -]
DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells | Windows Phone Central

 

[5150 Joker]

It is my understanding that Lumia 1520 (AT&T-US version) will not work with Qi-wireless standard devices at all. AT&T’s Lumia 1520 will only work with devices that are PMA wireless standard and you basically have to get it from US side because AT&T’s Lumia 1520 is a special made phone for US consumers. So, make sure you read the carefully the specs of the wireless-charging device you want to buy for your Lumia 1520 and it must say: ‘PMA standard’

If you are brave enough you should be able to modify your Lumia 1520 to make it compatible with Qi-wireless charging devices. Here is the article, check it out:

[- DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells -]
DIY - Add Qi-wireless charging to your AT&T Lumia 1520 with these replacement shells | Windows Phone Central

Did you not read the title of this thread or the subsequent discussions?

 

[Toink]

I still have my Nokia charging stand from my 920 and it works and the 1520 still stand up on it no problem. The stand ends around 2/3 of the way up the 1520.

Hi! Do you mean the Nokia DT-910 wireless charging stand?

Nokia Wireless Charging Stand Overview - Nokia

Because I have a couple and I'm getting the 1520 next week. I don't want to buy another wireless charger for the 1520. Thanks!

 

[manicottiK]

Hi! Do you mean the Nokia DT-910 wireless charging stand?

Yes, the DT-910 charging stand works as does the plate. My RM-937 is charging on the stand now; when I go up to bed, it'll finish charging on a plate.

 

[iliramove]

The DT-910 works fine with Lumia 1520, NFC included. "Fatboy" is working fine as well just in case anyone is wondering.

Sent from my RM-937_apac_sea_206 using Tapatalk

 

[jbowyer1]

For those of you that have the RM-937, which charging plate are you using? The DT-900 is too small

Do you just mean in terms of appearance? I charge mine on my DT-900 nightly without any problems, lining up the bottom of the phone with the bottom of the plate, where the LED is, just like I did with my 920.

 

[Benny Vallejo]

You are aware that the Nokia Dc-50 IS CURRENTLY OUT RIGHT NOW? Just do a search on eBay and amazon. about $100 with free shipping. Only the WHITE and CYAN are available at the moment.

 

[musicmadmac]

I have the DC-50 in White, it's a great. I did buy the White DT-910 which was fantastic but couldn't justify having both so I kept the DC-50 due to being portable.