Cases/Covers + Accessories for your Lumia 950

[camaroz1985]

It appear so. I saw a couple on ebay like that too. I was thinking about getting the brown Mozo and keeping my clear case over it just to protect things a little more.

 

[randyoaks187]

Just got the Incipio NGP case for my 950, and I am sad to see that the case raises the phone ever so slightly on my DT-910 such that the Qi no longer works. My interim solution was to lay a golf pencil across the stand and then set the phone sideways on that, but that's awfully hokey ... wish there was some way to adjust either the height of the charger or the coil within the cover.

 

[jeetu4444]

Is that attached over the MOozo cover?

Yes that's mozo case inside red leather with gold rim lovin it

 

[RicaChero]

And it fits okay? I ams seeing that on my favorite Casemate case my phone bulges out so that the glass is pushed flush with the lip of the case, a scary position, but the Jack Spade fits it fine, albeit a teensy less securely, but it is a pretty weak case. Pretty though.

 

[MarkAllett]

View attachment 123757got this case with a 9h glass protector for about MYR38.00 which is about 9USD. had bad experience with denting with previous 930, so this time im getting my 950 fully covered against falls. the case is a 2 piece rubber and polycarbonate shell

sorry for the low quality photo. only have my surface pro to take pics with.

What case is this? I can't find it on eBay. Thanks

 

[monedetoune]

@MarkAllet heres a link For Microsoft Lumia 950 Case Hybrid Hard Kickstand Protective Slim Phone Cover | eBay

 

[MarkAllett]

Ah! It seems no-one on eBay UK sells it hence I couldn't find it. I've now got one on order, albeit from China! Thanks

 

[suburbanl3g3nd]

I just ordered this case (Slim Metal Frame Bumper Acrylic Back Case Cover for Microsoft Nokia Lumia 950 | eBay) on eBay. It seems close to what you want and you could just not install the back portion of the cover for a bumper only case.

 

[camaroz1985]

I just ordered this case (Slim Metal Frame Bumper Acrylic Back Case Cover for Microsoft Nokia Lumia 950 | eBay) on eBay. It seems close to what you want and you could just not install the back portion of the cover for a bumper only case.

That is interesting. Just ordered one in silver. Figured it was worth a couple bucks to see if it is any good.

 

[suburbanl3g3nd]

That is interesting. Just ordered one in silver. Figured it was worth a couple bucks to see if it is any good.

Yeah, I went gold. Looks promising from China and at 6 bucks... what's there to lose really. Seller was responsive when I told him I needed a tracking number and to change the shipping address since I just moved. And how badly can you mess up hard plastic and metal? (Later I will come to regret that ha)

 

[elgobuda]

Since getting the device I've been searching high and low for a spare charger for the phone that will charge it as fast as the one that came in the box. Since this device does not have QuickCharge from Qualcomm, it took a lot of searching to find a charger that's compatible.

Finally, I have found it: 5V 3A Charger,Type c charger,usb c charger,usb-c charger,5v 3a Fast Ch

USB Type C Charger, CHOE 3A Rapid Wall Charger with the Latest Charging for Lumia 950xl/950, Nexus 5x/6p

Basically its a 15W charger, 5V3A which is the same as the one that came with the device.

The company itself is rather helpful and as they don't sell this in my country, they kindly offered a code to use to buy on Amazon.

 

[camaroz1985]

I just ordered this case (Slim Metal Frame Bumper Acrylic Back Case Cover for Microsoft Nokia Lumia 950 | eBay) on eBay. It seems close to what you want and you could just not install the back portion of the cover for a bumper only case.

Mine came today.

Here it is installed. Looks and feels ok, except for the back, which feels like cheap plastic (because it is). Cutouts for charging and headphones are small but fit the factory charger (not anything with a bigger end though) and I'm sure some headphones. The most disappointing thing for me is they chose not to put a button cover over the camera button like the did for lock and volume. The buttons that they did cover feel fantastic, but for some reason they chose to just cut out around the camera button. It does make the phone more squared off on the back, but doesn't add much bulk. The back of the case sits pretty much flush with the silver trim ring around the camera.

To put the case on you just sit the phone in the aluminum piece (it isn't a press fit, just kind of slides on, and foam strips keep the phone from moving around. Then you slide the back plastic piece onto the back, starting from the charging port, up through grooves on the sides of the aluminum, then you push the bottom down over a "latch" at the bottom. There is a finger nail groove beside the latch to remove the rear cover.

I would say it is a waste, and I already took it off. Does make the phone look a little more "premium", and a lot more like an iphone with the lines on the back, so if that is what you want, then I guess it is good, but not for me. Back to my Orzly Fusion case. Really thinking about picking up one of the new wood Mozo cases, or the cognac leather one.

 

[bulls96]

Mine came today.

Here it is installed. Looks and feels ok, except for the back, which feels like cheap plastic (because it is). Cutouts for charging and headphones are small but fit the factory charger (not anything with a bigger end though) and I'm sure some headphones. The most disappointing thing for me is they chose not to put a button cover over the camera button like the did for lock and volume. The buttons that they did cover feel fantastic, but for some reason they chose to just cut out around the camera button. It does make the phone more squared off on the back, but doesn't add much bulk. The back of the case sits pretty much flush with the silver trim ring around the camera.

To put the case on you just sit the phone in the aluminum piece (it isn't a press fit, just kind of slides on, and foam strips keep the phone from moving around. Then you slide the back plastic piece onto the back, starting from the charging port, up through grooves on the sides of the aluminum, then you push the bottom down over a "latch" at the bottom. There is a finger nail groove beside the latch to remove the rear cover.

I would say it is a waste, and I already took it off. Does make the phone look a little more "premium", and a lot more like an iphone with the lines on the back, so if that is what you want, then I guess it is good, but not for me. Back to my Orzly Fusion case. Really thinking about picking up one of the new wood Mozo cases, or the cognac leather one.

Thanks for the review!

 

[Abhinav Mudaliar]

Looks cool enough

 

[swanlee]

Does it have the microphone holes for the back?

 

[maevinj]

I just want to down vote two accessories. I had this https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUwpUvbUpU3477199 and this https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUwpUvbUpU3477199 on my 950. It fell two feet off the side of my couch onto my hardwood floor. It landed on the button side and caused 4 big cracks and destroyed the LCD.

 

[FiJPM]

I have been using Bugatti leather pouches for my Lumias. Now they do not make one for L950, however, eBayed one for Xperia Z5 based on specs that are similar to L950 and I have ta say its a perfect fit even with Mozo back cover.

 

[Sicka Altaar]

is on amazon called coverware I have one its pretty neat and solid makes the phone looks high tech. the cover is really tight ie if you remove the case the back cover might come off with the case
http://www.amazon.com/COVRWARE%C2%AE-Lumia-950-Case-CW-950-SL02/dp/B018Y7KNHA/ref=sr_1_sc_1?s=wireless&ie=UTF8&qid=1462464282&sr=1-1-spell&keywords=coverware++950

View attachment 123757View attachment 123758View attachment 123759View attachment 123760View attachment 123761View attachment 123762
got this case with a 9h glass protector for about MYR38.00 which is about 9USD. had bad experience with denting with previous 930, so this time im getting my 950 fully covered against falls. the case is a 2 piece rubber and polycarbonate shell

sorry for the low quality photo. only have my surface pro to take pics with.

 

[camaroz1985]

Does it have the microphone holes for the back?

Now that you mention it, no it does not.

 

[RumoredNow]

Mine came today.

Thanks for that. I've recently ordered the 640 version in Mirrored Gold, Nice to see how it goes together. Thanks for the pics and the detailed post. I'm not expecting much and your review leaves me with about the same expectation level I had going in LOL.

Really thinking about picking up one of the new wood Mozo cases, or the cognac leather one.

Do the cognac. That's class all the way. Oxblood would be really groovy if they made that.