(new Nokia care suit) How to: get the Portico update for the Global Lumia 920. (Clean install)

[Nabkawe5]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

While I wish you could flash anything you want, I don't guarantee it , I haven't tried flashing anything but my original one , I advice you to do the same.

 

[Nabkawe5]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

I tried the volume down + power button thingy and click Retry... phone keeps on restarting without flashing no matter how long I keep those buttons held down.

All this after the vibration too.

Do I need to have the phone off before I start? .

Another point to think of , use a main USB port don't use a hub and if you're using a certain USB port change it to the other.

 

[DyeLongJustice]

Hello , please check your product code and share it with me and i'll explain .

I will give you the exact code tomorrow, since I don't have it w me right now, but I know that it's the rm820 and has the same firmware as a Rogers lumia. The only difference is that it's pentaband and has no carrier branding landsays ddeveloper device). Sorry for the lack of info!

 

[Jed Cutler]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Can I do this on a Win XP laptop?

 

[naeem151287]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Mine is a EE 920 from Phones4U. I am downloading the Portico update RM-821 VAR APAC HK 1232. 5951. 1249. 1004. Hopefully it will work fine. Will this debrand my 920?

 

[Nabkawe5]

Can I do this on a Win XP laptop?

no, sorry.

 

[Nabkawe5]

Mine is a EE 920 from Phones4U. I am downloading the Portico update RM-821 VAR APAC HK 1232. 5951. 1249. 1004. Hopefully it will work fine. Will this debrand my 920?

we won't know till u try. Just remember to download your original software before just in case you need to reverse the process.

 

[naeem151287]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Sure. I am quite certain it will work since I replaced my EE firmware with CV GB firmware earlier, but now I want to update to Portico and since there is no CV GB firmware with Portico I am trying the HK one. I don't know about the debranding though.

 

[lkhoe]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Another point to think of , use a main USB port don't use a hub and if you're using a certain USB port change it to the other.

Ok. This is what I did coz the phone refuses to enter recovery mode:
1. Switch off phone
2. Connect to PC. At this point, the Retry button is ready to press.
3. Phone will restart once you connect to PC. As this is going on, quickly hit RESTART! No need for vol down + power button combination presses.
4. Now the phone will enter recovery mode and do its thing.

 

[Andrej Maister]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Sorry, just to make it clear i have a 059R1W4, so i cannot update my phone ? Could not find it on the list...

 

[Nabkawe5]

Yes Andrej although the list is updating everyday.

 

[Jed Cutler]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Tried with my Win XP laptop anyway. Couldn't find product code for my L920. It isn't there.

 

[Andrej Maister]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

That's bad, those restarts started to be really annoying..

 

[OliverK]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

How do you know which code is the Portico update?

I am looking on the care suite and can't figure out how you tell?

 

[OliverK]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

I updated my UK unlocked model to the belgian promimus version and everything works - but I have noticed an annoying bug in that the proximity sensor does not turn the screen back on during a call if I move it away from my face.

Anyone else had that?

 

[ZiCoN_dk]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Annoying... Under the 1002 listing, Scandic NO SE is shown now, but the DK isn't yet But could hope the Danish version shows up next week

 

[DyeLongJustice]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

what is the difference between the firmwares that end in 1001 and 1002? I know the other one is portico, but I don't know what the difference is between those two. I have the developer edition lumia 920 with the unbranded Rogers firmware that ends in 1001, but have the option of changing to 1002 and portico. Also, will flashing a Rogers firmware relock the phone? I'm using in on the mobile USA and don't want to accidently lock the phone. Thanks!

 

[DyeLongJustice]

what is the difference between the firmwares that end in 1001 and 1002? I know the other one is portico, but I don't know what the difference is between those two. I have the developer edition lumia 920 with the unbranded Rogers firmware that ends in 1001, but have the option of changing to 1002 and portico. Also, will flashing a Rogers firmware relock the phone? I'm using in on the mobile USA and don't want to accidently lock the phone. Thanks!

I meant t-mobile USA. Oops!

 

[Nabkawe5]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

Tried with my Win XP laptop anyway. Couldn't find product code for my L920. It isn't there.

I don't think Windows Xp works with this . I don't recommend it , if you couldn't find your Product code don't worry it's being updated weekly.

 

[Nabkawe5]

Re: How to: Force Portico update for the Global Lumia 920. (Clean install)

How do you know which code is the Portico update?

I am looking on the care suite and can't figure out how you tell?

Hello , you should look for the number 5951 here's a visual look