Using the Idol 4s with W10M on AT&T?

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

Going back to your older posts...If 06829 is disabled (which it was on mine do not enable it). You would only change the one that is active. I made the choice to activate (enter values there and the phone started to behave erratically).



VoLTE would depend on provisioning during boot time, and possibly the carrier if they depend on the IMEI or not. MTP is enabled through Interop Unlocking after installing Interop Tools from gus33000.

Nate,

I am following your this how to but when

but when I am going to enable MTP full access using Interop Tools I am getting

C:\Program Files (x86)\Windows Kits\10\Tools\bin\i386>iutool -V -p C:\Users\partha\Desktop\WP\ndtk_spkgs\nokia.executable_oemservicehost.generic.spkg

(IUTool Version: 13:54:04/Apr 29 2015)

Log file: C:\Users\partha\AppData\Local\Temp\IUTool-{299338D7-E9AD-4D02-BD74-B341894FDEEF}.etl

[1] Started device 4a7d13082e332ac30efacc78602824bc
[1] Transferring files started
[1] Transferred file 1/1
[1] Transferring files complete: 1 file
[1] Installation failed (HRESULT = 0x80004005)
[1] Failed (0x80004005)

ERROR: 0x80004005

Command failed. (HRESULT = 0x80004005)

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

Try this instead:
C:\Program Files (x86)\Windows Kits\10\Tools\bin\i386>iutool -V -p C:\Users\partha\Desktop\WP\ndtk_spkgs

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

1: It should be 67678

2: See this thread and make sure to use the IDOL 4 Pro rom from WDRT (windows device recovery tool)

Just be mindful not to expect it to work. Who knows what configuration if any could work for this....

is there any chance to brick it if i flash idol pro firmware?

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

i think idol pro dual sim

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

It is not dual sim. But there is a chance of something going wrong I suppose. How much of a chance I cannot tell...

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

i just tried but after flashing it Its saying " No Network Found on sim " wifi is fine

 

[Palm_forlackofchoice]

Re: Using the Idol 4s with W10M on AT&T?

Follow up to my issues on Cricket wireless (att service).
After deleting the apn' s for both LTE and mms, restarting the phone. The default APN activated for LTE, mms doesn't show one , but it does work.

I have been randomly loosing the "default" APN. When this happens I can make and receive calls, but no data or mms. I have to reboot the phone to correct this.
Also I don't have visual voicemail or hd voice. I have not hard reset yet, but may over weekend.

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

i just tried but after flashing it Its saying " No Network Found on sim " wifi is fine

This is after you altered the LTE bands?

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

Follow up to my issues on Cricket wireless (att service).
After deleting the apn' s for both LTE and mms, restarting the phone. The default APN activated for LTE, mms doesn't show one , but it does work.

I have been randomly loosing the "default" APN. When this happens I can make and receive calls, but no data or mms. I have to reboot the phone to correct this.
Also I don't have visual voicemail or hd voice. I have not hard reset yet, but may over weekend.

A hard reset should correct this...

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

yes i have changed earlier just added Band3 but no 2g,3g,4g network simply cross in sim

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

Sounds like it could not even load the radio layer/stack at OS boot. I am not sure how to trouble shoot that. You could try a hard reset and if still the same flash it back to the original FW.

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

tried same problem donot know why

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

I have noticed that celluar is stubbornly hard to work with on the OEM devices like Alcatel, HP, MCJ etc. Why I prefer working with Lumias when it comes to Radio or cellular tweaking...

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

my top speaker got damaged sounds are not clear, Blowing...

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

nate
can u install systen monitor app and check total memory? my one is showing 2 gb only instead of 3.5 gb

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

my top speaker got damaged sounds are not clear, Blowing...

That is a known issue.

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

nate
can u install systen monitor app and check total memory? my one is showing 2 gb only instead of 3.5 gb

That sounds like an OS bug related to flashing different ROMs maybe? If it is a HW fault I am not certain that the OS and FW are smart or capable enough to disable the modules like in other modular systems that have that ability.

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

if you go Factory Mode and Test speakers you will get same, before it was working maybe due to flashing EU ROM

 

[nate0]

Re: Using the Idol 4s with W10M on AT&T?

Were you able to revert back all your changes? I bet you have a point on the HW being different, maybe in antenna configuration or possibly even the SIM card module (if it is seperate) could be different. Then again it could just be disabled (EU LTE bands) at the SOC level too.

 

[Partha Goswami1]

Re: Using the Idol 4s with W10M on AT&T?

That sounds like an OS bug related to flashing different ROMs maybe? If it is a HW fault I am not certain that the OS and FW are smart or capable enough to disable the modules like in other modular systems that have that ability.

and if I enable Developer mode and view system info from device portal it is showing 3.5 GB